Able 2 SBO.ME 11.1 005.STT Instructions

GENERAL INFORMATION:
Optimum Operating Voltage
Operating Current - 3 amps per output maximum
-
Recommended Fuse
------------------------------------------------------------------------------------------------------
INSTAllATION INSTRUCTIONS:
1. Find location where the LED Flasher (Shown below) will be mounted. Mark holes to be drilled. Mount
the LED Flasher with screws included.
2. Wire LED Flasher as shown.
OPERATING INSTRUCTIONS:
1. Connect Red wire to +12v, using a 5 amp fuse maximum.
2. When +12v is applied to the Tail Light wire, both outputs will illuminate dimly.
3. When +12v is applied to the
applied to the Pattern Selector wire, the strobe flash pattern will change. Strobe flash overrides Tail Light.
4. When +12v is applied to Brake Light wire, both outputs illuminate brightly. Brake Light overrides Tail Light
and Strobe Flash.
5. When +12v is applied to left
ride all other features.
SBO.ME@
MODEL NO. 11.1 0O5.STT
- +13.8 volts DC
5 amps
Strobe Flash wire, both outputs flash randomly. When +12v is momentarily
or Right Turn
MODEL
PRODUCTS COMPANY.
U.S. and Canada Toll Free Numbers.
E-mail: sales@able2products.com
StoplTail/Turn
LED Flasher
wire, the corresponding output will flash. Turn Signal will over
0
11.1005STT
SlopfTaMTurn
LED Flasher
"""O",",""",
Red-+12v
Black-Ground
BI", - Left out
Yellow - Rlghtout
Green - Breke In
Pu",'e - Tall In
WhlP"ple - Left Turn In
Wh/Brown - Strobe In
WhltelRed-RlghtTurnln
White - Pattern Selector
~
MOO.In U.S.A.
0
804 East Hwy. 248
Phone: 800-641-4098
WEB: www.able2products.com
. Cassville, MO65625
FAX: 800-526-1240
,
2/06