NexiGo LT20 Manual

If you have any problems, please contact us at cs@nexigo.com at any time for further assistance. This product is covered by our industry leading 1-year manufacturer's warranty. Make sure to register your purchase at nexigo.com/warranty for a FREE additional 1-year warranty!

Register to get EXTRA ONE year warranty.
Only valid in registering within 14 days of product delivery.
nexigo.com/warranty

Features

What's in the Box?

1x NexiGo Multicolor Night Light
1x USB Type-C Charging Cable
1x User Manual

Product Diagram

Specifications

Usage Instructions

Power On/Off:
Power On:
Touch and hold the Power Button on the bottom of the unit for 1.5 seconds to turn on the light. The White Light, RGB Light, and Timer buttons on the top panel will light up when the light is powered on. Double tap the Touch Ring to turn on/off the light when it is powered on.

Power Off:
Press and hold the Power Button for 1.5 seconds to power the light off.

White Light Mode:
Light Switch:
Press the White Light button to switch among the five white light temperatures: 2200K/3000K / 4000K/ 5000K 16500K.

RGB Light Mode:
Light Switch.
Touch the RGB Light button to switch among nine colored light modes: red, orange, yellow, green, cyan, blue, purple, pink, and a mode that slowly switches among colors while providing a soothing "breathing' effect.

Night Light Mode:
Turn On:
First, double tap the Touch Ring to turn the light off. When the light is off but powered on, press and hold the Touch Ring to turn on the night light.

Turn Off:
Double tap the Touch Ring to turn off the night light.

Dimming:
All Modes:
Press and hold the Touch Ring to adjust the brightness. When you press and hold the Touch Ring, the light will alternate between increasing brightness or dimming. Once it reaches maximum brightness or minimum dimness it will remain at that setting. Pressing and holding the Touch Ring again will cause it to reverse.

Note:
The Indicator Light will flash green twice when the brightness reaches the maximum or minimum level.

Timer:
Activate Timer:
Touch the Timer button to set a 30 or 60 minutes timer. This will cause either the 30 or the 60 to light up, respectively.

Cancel Auto-timer:
Touch the Timer button again to deactivate the timer.

Light Memory Function:
The light will retain brightness and color settings between uses.

Low Battery Alert:
The Indicator Light will slowly flash red when the battery is below 20%. Please charge the light by connecting it to a power source (Laptop, computer, etc. / Output: DC5V/1A) using the provided USB Type-C charging cable.

Type-C USB Charging:
The Indicator Light will flash red while the light is charging. It will turn to a steady green light when the light is fully charged. For safety reasons, please unplug the adapter after the light is fully charged

Notes:

• ONLY use a DC5V/1A adapter with the provided USB cable to power the unit. Using any other power adapter or cable may cause damage to the product.
• When this unit is not in use or when fully charged, it is recommended that you unplug it from the power source.
• Please use a lint-free dry cloth to clean the product. Do not clean the product with water or alcohol. Ensure the unit is unplugged and powered off before cleaning.
• Do not charge the light using a frayed or damaged USB cable.
• Do not touch the device.power adaptor, or USB cable with wet hands. Keep this product dry.
• DO NOT attempt to repair, disassemble, or modify the light under any circumstance.
• Do not place the light near fire, heat sources, or in direct sunlight.
• Ensure that this product has enough ventilation for general use.
• Only use on a flat, horizontal surface.
• To ensure longevity and lifespan of the unit, protect it from dust and do not place other objects on it.