Launch CAT-303 User Manual

LAUNCH
Trademark Information
LAUNCH is a registered trademark of LAUNCH
TECH. CO., LTD. (LAUNCH for short) in China and
other countries. All other LAUNCH trademarks, service
marks, domain names, logos, and company names
referred to in this manual are either trademarks,
registered trademarks, service marks, domain names,
logos, company names of or are otherwise the property
of LAUNCH or its affiliates. In countries where any of the
LAUNCH trademarks, service marks, domain names,
logos and company names are not registered, LAUNCH
claims other rights associated with unregistered
trademarks, service marks, domain names, logos, and
company names. Other products or company names
referred to in this manual may be trademarks of their
respective owners. You may not use any trademark,
service mark, domain name, logo, or company name of
LAUNCH or any third party without permission from the
owner of the applicable trademark, service mark,
domain name, logo, or company name. You may contact
LAUNCH by visiting Launch at
or writing to LAUNCH, Xinyang Building, Bagua 4th
Road, Shenzhen, Guangdong Province, P. R. C., to
request written permission to use Materials on this
manual for purposes or for all other questions relating to
this manual.
Copyright Information
Copyright © 2000 by LAUNCH TECH. CO., LTD. All
rights reserved. No part of this publication may be
reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical,
photocopying, recording or otherwise, without the prior
written permission of LAUNCH. The information
contained herein is designed only for the use of this unit.
LAUNCH is not responsible for any use of this
information as applied to other units.
Neither LAUNCH nor its affiliates shall be liable to the
purchaser of this unit or third parties for damages,
losses, costs, or expenses incurred by purchaser or
third parties as a result of: accident, misuse, or abuse of
this unit, or unauthorized modifications, repairs, or
alterations to this unit, or failure to strictly comply with
LAUNCH operating and maintenance instructions.
LAUNCH shall not be liable for any damages or
problems arising from the use of any options or any
consumable products other than those designated as
Original LAUNCH Products or LAUNCH Approved
Products by LAUNCH.
General Notice
Other product names used herein are for identification
http://www.cnlaunch.com
CAT-303 Auto Transmission Fluid Changer User's Manual
purposes only and may be trademarks of their
respective owners. LAUNCH disclaims any and all rights
in those marks.
The equipment is for specialist or
qualified technician use only.
Disclaimer
All information, illustrations, and specifications
contained in this manual are based on the latest
information available at the time of publication.
Launch reserves all the right to make changes at
any time without notice.
Safety Precautions
Read all service procedures and precautions,
installation instructions and equipment operating
manuals thoroughly. Failure to observe these
precautions, or the improper use of equipment, could
result in property damage, serious injury or death.
Never allow improperly trained personnel to perform
these procedures or operate equipment.
Read and understand the User's Manual before
attempting to operate the CAT-303.
The operator should be quite familiar with the
shift of automatic transmission to avoid
transmission damage caused by mis-operation.
Vehicle exhaust includes various poisonous and
harmful gases (such as carbon monoxide,
hydrocarbon, nitrogen oxygen complex, etc.).
Keep the unit in a well ventilated work area when
changing fluid.
Avoid touching hot surfaces such as exhaust
manifolds, radiator, etc.
When disconnecting hoses and connectors,
wrap them with towel to prevent spurting.
Turn off the air pressure adjusting valve and turn
on the fluid return valve when the unit is not
being in use.
Always make the drive wheels hanging when
changing the ATF.
Do not expose the unit in the direct sun or rain.
Place the unit vertically.
When changing the auto ATF, the operation
should be performed by trained personnel. The
quality of the selected ATF must conform to the
direction as specified in the manual of the auto
to be operated. Otherwise, LAUNCH shall not be
liable for any direct or consequential damages.
i