SAFE-TECH ST-110-SMI Quick Start Manual

*Please pair all devices before Installing them
Quick Start Guide - For Interlinked Alarms
Wireless
Interlinked Alarms
Front View
Back View (Without Back Plate)
Pairing Interlinked Alarms
Remove the Pairing
Activate Pairing Mode
(Only for Master Alarm)
Pair the Alarms
After Pairing
Testing the Alarms
* Remote control have the same function but with a Red LED light
Buzzer
Test/ Silent Button
LED Light
On/Off Switch
Press and hold the test button until Green light has
flashed 4 times, repeat with all alarms.
Choose one alarm to be the master alarm, press and
hold test button till the green light has flashed
3 times. Immediatley remove finger after 3rd green light.
To pair the rest of the alarms to the master alarm, press
and hold test button on the rest of the alarms till the
green light has flashed 2 times
After all the alarms are paired, press the master
alarm once to stop pairing mode.
To test the alarms press one, and all will go off.
Mains Powered
Interlinked Alarms
Front View
LED Light
Back View (Without Back Plate)
(Battery Powered & Mains Powered)
Scan for Pairing Videos
SAFE-TECH © - 2023 | All Right Reserved
SAFE-TECH V1
Test/ Silent Button
Buzzer
On/Off Switch