Please fill some droplets of resin and acid free oil into the air inlet and let the tool run free for a couple of seconds. (E.g. Red Rooster air tool oil: Order no. Atlub) Before connecting the hose to the tool please check, whether the hose and the quick coupler are clean. Do this by letting air run freely through hose and quick coupler, It is absolutely necessary, that quick coupler and hose have a sufficient diameter.
Page 5
The quality of the compressed air must be good, which means clean, dry and this is best assured by means of an air filter. We advise the use of a complete FRL (filter, regulator, lubricator) unit. The oiler has to be adjusted to approx. 3 to 6 droplets per minute.
Page 6
Never aim the spark tail at yourself or other persons. Convince yourself that no persons are in the working zone or danger zone. The advised minimum age for operating this tool is 18 years. Keep away from whipping hoses, this can cause injuries. A broken air hose or a hose that comes loose of the hose joint can start whipping.
Select the correct abrasive dimensions, rpm and spindle fitting for this tool. Inspect the abrasive product on damages, cracks or other defects before mounting it on the tool. Spindle fitting of the abrasive must be correct, do not use any kind of adaptor to fit the abrasive. Flanges for mounting the abrasives must be in good condition without cracks and spindle and spindle threads are not damaged.
Warranty covers material or construction mistakes of the manufacturer, which are clearly definable. Replacement of parts or repair by an official Yokota/Red Rooster service workshop is free of charge, when the tool is covered by warranty. Freight or postage is for the account of the buyer. Damage attributable to a normal wear, overloading or incorrect use is excluded from warranty.
Declaration of Conformity Declaration of Conformity Brand: RedRooster Product: Grinders and sanders Type: RRG-2144 Capacity: 1,04 2102021 WE, RAMI YOKOTA B.V., hereby declare that this product is conform the European Directive 2006/42/EG and, the standard EN ISO 11148-7 Technical file available from Rami Yokota BV: RAMI YOKOTA BV De Ruyterkade 120 1011 AB Amsterdam...
Need help?
Do you have a question about the 8717981364671 and is the answer not in the manual?
Questions and answers