Razer KIYO X Manual

Also See for KIYO X:

Master manual (16 pages)

Table of Contents

Contents

1 WHAT'S INSIDE / WHAT'S NEEDED
- 1.1 WHAT'S INSIDE
- 1.2 WHAT'S NEEDED
2 LET'S GET YOU COVERED
3 GETTING STARTED
4 SAFETY AND MAINTENANCE
- 4.1 SAFETY GUIDELINES
- 4.2 MAINTENANCE AND USE
5 Documents / Resources
- 5.1 References
- 5.2 Download manual

Razer KIYO X Manual

WHAT'S INSIDE / WHAT'S NEEDED

WHAT'S INSIDE

Razer Kiyo X
1. Status indicator
2. Wide-angle lens
3. Built-in microphone
4. Camera stand
5. Thread mount
6. Type A connector
Important Product Information Guide

WHAT'S NEEDED

PRODUCT REQUIREMENTS

Direct USB connection to a PC

RAZER SYNAPSE REQUIREMENTS

Windows 10 64-bit (or higher)
Internet connection for software installation

LET'S GET YOU COVERED

You've got a great device in your hands, complete with a 1-year limited warranty coverage. Now maximize its potential and score exclusive Razer benefits by registering at razerid.razer.com
Product serial number location

Got a question? Ask the Razer Support Team at support.razer.com

GETTING STARTED

Depending on your setup, you may either position the camera on top of a monitor or table; or attach the camera to a tripod* using its thread mount.
*Tripod not included.
Connect the camera to any of the USB-A ports on your PC and launch any camera application. The camera's status indicator will light up, indicating that the device is active.

information To optimize the streaming and recording performance of the camera, it's highly recommended that you connect it directly to your PC. Connecting the device to a USB hub, switch or extender may affect its performance.

Use the Razer Synapse app to fine tune the camera's image capture settings such as its brightness, contrast, and much more.
*Install Razer Synapse when prompted or download its installer from razer.com/synapse

SAFETY AND MAINTENANCE

SAFETY GUIDELINES

In order to achieve maximum safety while using your Razer Kiyo X, we suggest that you adopt the following guidelines:
Should you have trouble operating the device properly and troubleshooting does not work, unplug the device and contact the Razer hotline or go to support.razer.com for support.
Do not take apart the device and do not attempt to operate it under abnormal current loads. Doing so will void your warranty.
Do not use or install the device and its components near water, moisture, solvents, or other wet surfaces, nor expose the device to high temperatures or direct sunlight for an extended period of time.
Keep the device away from liquid, humidity or moisture. Operate the device only within the specific temperature range of 0°C (32°F) to 40°C (104°F). Should the temperature exceed this range, unplug and/or switch off the device in order to let the temperature stabilize to an optimal level.

MAINTENANCE AND USE

The Razer Kiyo X requires minimum maintenance to keep it in optimum condition. Once a month we recommend you unplug the device from the computer and clean it using a soft cloth or cotton to prevent dirt buildup. Do not use soap, harsh cleaning agents, or abrasives.