Subscribe to Our Youtube Channel
Related Manuals for LINET Sella
Summary of Contents for LINET Sella
- Page 1 Instructions for Use and Technical Description Sella Multifunctional Chair D9U001SLAB-0101 Version: 00 Date of publication: 2024-06...
- Page 2 Czech Republic Tel.: +420 312 576 111 Fax: +420 312 522 668 E-mail: info@linet.cz http://www.linet.com Service department: service@linetgroup.com Authorized Representative in Great Britain: LINET UK Ltd 11 Brunel Way Segensworth East Fareham Hampshire PO15 5TX United Kingdom Authorized Representative in Switzerland:...
- Page 3 Sella Multifunctional Chair Author: L I N E T spol. s r. o. Related links: www.linet.com D9U001SLAB-0101 Version: 00 Date of publication: 2024-06 Copyright © L I N E T spol. s r. o., 2024 Translation © L I N E T spol. s r. o., 2024 All rights reserved All trademarks and brands are the property of the appropriate owners.
-
Page 4: Table Of Contents
Cleaning the leatherette upholstery . 39 Delivery ..........17 Cleaning the multifunctional chair Scope of Delivery ......17 Sella ..........40 Variants of the Sella multifunctional 9.4.1 Cleaning before changing patients .. 40 chair ..........17 9.4.2 Daily cleaning ........40 Putting into Service ...... -
Page 5: Introduction
Introduction Please read carefully this complete instruction manual which was designed to familiarize you with its correct use and with the parameters of your new reclining relax chair. Please always follow the instructions of this manual and use the chair always only in accordance with these instructions. Please keep these instructions always near the chair throughout its operation course. -
Page 6: Symbols And Definitions
1 Symbols and Definitions Warnings 1.1.1 Types of warning notices Warning notices are differentiated by the type of danger using the following key words: ► CAUTION warns about the risk of material damage ► WARNING warns about the risk of physical injury 1.1.2 Structure of warning notices CAUTION! Type and source of risk! -
Page 7: Symbols
Symbols EU LEGISLATION COMPLIANT PRODUCT UK CONFORMITY ASSESSED (UKCA) MARKING (PRODUCT NORMATIVELY HARMONIZED FOR GREAT BRITAIN ECONOMIC AREA) AUTHORIZED REPRESENTATIVE IN GREAT BRITAIN AUTHORIZED REPRESENTATIVE IN SWITZERLAND QUALITY MANAGEMENT SYSTEMS CERTIFICATION AUTHORITY MARKING POSSIBLE RISK THIS SYMBOL INTRODUCES ANY INFORMATION, THAT MAY HELP YOU TO AVOID OPERATIVE PROBLEMS TYPE B APPLIED PARTS PRODUCTION NUMBER... - Page 8 EAC MARKING SAFE OPERATIONAL LOAD SAFE PATIENT LOAD OVERALL PRODUCT WEIGHT PRODUCER DATE OF PRODUCTION MAXIMUM LOAD OF THE BACKREST MAXIMUM LOAD OF THE LEGREST FOLLOW THE INSTRUCTIONS MANUAL. PACKAGING MATERIAL: “KEEP DRY” PACKAGING MATERIAL: “FRAGILE!“ PACKAGING MATERIAL: “THIS SIDE UP” PACKAGING MATERIAL: DO NOT STACK DURING STORAGE 8/45...
- Page 9 PACKAGING MATERIAL: OVERSEAS PACKAGE: STACKING LIMIT BY NUMBER (3 PACKAGES FOR TRANSPORT) PACKAGING MATERIAL: OVERSEAS PACKAGE: STACKING LIMIT BY NUMBER (6 PACKAGES FOR STORAGE) PACKAGING MATERIAL: PAPER RECYCLING SYMBOL DO NOT POLLUTE THE ENVIRONMENT RECYCLING SYMBOLS D9U001SLAB-0101 9/45...
-
Page 10: Production Label With Udi
Production label with UDI The serial label contains information about Address of Manufacturer, Manufacturing Date (Year- Month-Day), Product Reference Number, Product Serial Number, Global Trade Item Number (GTIN), Unique Device Identification (UDI), symbols, weight specifications and electrical specifications. Fig. 1 Production label placement - fixed version Fig. -
Page 11: General Instructions
2 General instructions General information According to the Act on Means of Medical Instrumentation the product may only be operated by persons with adequate qualification. Performance of servicing works: L I N E T spol. s r. o. authorized service personal can only respon- sibly evaluate the safety technological features if any repairs or changes on the product have been performed by the manufacturer's authorized representatives and the chair is operated in full compli- ance with the operating instructions. - Page 12 FIRE EXTINGUISHING INFORMATION WARNING! Danger of frostbite by contact of CO with human skin! Do not use halotron extinguisher in closed rooms without ventilation – danger to your health! DO NOT USE Powder extinguisher Foam extinguisher extinguisher Water extinguisher Halotron extinguisher 12/45 D9U001SLAB-0101...
-
Page 13: Intended Use
3 Intended use WARNING! Sella is an adult reclining relax chair designed for use by hospital and nursing home residents in order to support physio- logical function, facilitate care, patient comfort and activities of daily living. WARNING! Any other use, such as transportation trolley for equipment, with unacceptable accessories is not approved! ►... -
Page 14: Overview Of Basic Parts
4 Overview of basic parts Fixed version - without central castor control 1. Backrest 7. Headrest adjustable for height 2. Seat 8. Handle of the backrest with a hook + Control lever for adjusting mattress 3. Legrest support platform 4. Safety step 9. -
Page 15: Fixed Version - With Central Castor Control
Fixed version - with central castor control 1. Backrest 7. Plastic cover 2. Seat 8. Headrest adjustable for height 3. Legrest 9. Handle of the backrest with a hook + Control lever for adjusting the mattress 4. Safety step support platform 5. -
Page 16: Lift Version - With Central Castor Control
Lift version - with central castor control 1. Backrest 9. Handle of the backrest with a hook + Control lever for adjusting the mattress 2. Seat support platform 3. Legrest 10. Multifunctional armrest 4. Safety step 11. Armrest release lever 5. -
Page 17: Scope Of Delivery And Chair Variants
Scope of Delivery ► Sella Multifunctional Chair ► Instructions for use Variants of the Sella multifunctional chair Basic configuration: ► Undercarriage - fixed version ► Independently braked castors, 4x Tente, 125 mm ►... - Page 18 ► Holder behind the patient´s back, lower part □ Stacking pocket □ Urine bag holder ► Holder behind the patient´s back, upper part □ Horizontal oxygen bottle holder □ Holder for hanging oxygen bottle □ Table holder ► Table □ Table without safety barrier □...
-
Page 19: Putting Into Service
6 Putting into Service WARNING! Risk of injury when working on the chair! Ensure that the castors are locked prior to putting into service and maintenance. Set up the chair as follows: ► Unpack the chair. ► Check the delivery (see "5 Scope of delivery and chair variants"). ►... -
Page 20: Operating The Chair
7 Operating the chair WARNING! The chair is not designed for persons heavier than 150 kg. WARNING! Always check the position of the person sitting or lying on the chair and Ensure that they cannot be injured when handling the chair. WARNING! During lowering to the lowest position no objects that could collide with the chair or block it may be present nearby! - Page 21 BASIC POSITIONS OF THE CHAIR Fig. 3 Transport position Fig. 4 Resting position Fig. 5 Reclining position Fig. 6 Lifted position Fig. 7 Getting on/off position D9U001SLAB-0101 21/45...
-
Page 22: Castor Control
Castor control WARNING! Risk of injury due to involuntary movement of the chair! ► Ensure the castors are braked when the chair is occupied. ► Ensure the castors are braked when the chair should not move. ► Ensure the castors are braked before chair positioning. ►... -
Page 23: Positioning The Chair Mattress Support Platform
Positioning the chair mattress support platform WARNING! Risk of injury due to involuntary movement of the chair! ► Ensure the castors are braked when the chair should not move. ► Ensure the castors are braked before chair positioning The mattress support platform of the chair may be altered easily using the incorporated gas spring. -
Page 24: Adjusting The Multifunctional Armrests
Adjusting the multifunctional armrests WARNING! Risk of injury due to involuntary movement of the chair! ► Ensure the castors are braked when the chair should not move. ► Ensure the castors are braked before chair positioning. The armrests serve for arm support and can be adjusted to four positions. They are cushioned on the upper part. -
Page 25: Fixation Of The Table In The Armrest (Optional)
Fixation of the table in the armrest (optional) The pins of the table are inserted in the front openings in the multifunctional armrests. It is possible to adjust two secure positions – more and less inserted. Safety step WARNING! Risk of injury due to involuntary movement of the chair! ►... -
Page 26: Height Adjustment Of The Headrest
Height adjustment of the headrest Headrest rests on a strap and may be shifted up or down as needed. Independent adjustment of backrest (optional function) WARNING! Risk of injury due to involuntary movement of the chair! ► Ensure the castors are braked when the chair should not move. ►... -
Page 27: Independent Adjustment Of Legrest (Optional Function)
Independent adjustment of legrest (optional function) WARNING! Risk of injury due to involuntary movement of the chair! ► Ensure the castors are braked when the chair should not move. ► Ensure the castors are braked before chair positioning. The position of leg rest only may be altered by pressing the control lever, which controls the gas spring. -
Page 28: Help With Getting On/Off (Optional Function)
Ensure the hose from the oxygen bottle is the right length and is routed so that it does not pinch. A unique feature of the SELLA multifunctional chair that minimizes the physical effort of staff han- dling patients. It allows the chair to be tilted by 25° forward and then lifted to the desired position. -
Page 29: Accessories
8 Accessories Overview of accessories Model No. MANDATORY SELECTION Armrests standard (pair) S6019366 Armrests for blood donation (pair) SB-SLA-ZP-038 OPTIONAL ACCESORRIES Siderails (pair) 110SLA0110A00 (violet) 110SLA0110B00 (blue) 110SLA0110F00 (green) 110SLA0110M00 (yellow) 110SLA0110P00 (orange) 110SLA0110A10 (apricot vowalon) 110SLA0110B10 (blue vowalon) 110SLA0110C10 (creme vowalon) Table 110SLA001000 Table with safety barrier... -
Page 30: Armrests Standard (Pair)
MANDATORY SELECTION Armrests standard (pair) Armrests for blood donation (pair) CAUTION! Armrests of the product are designed for a maximum load of 30kg ► In case of overload the component may lose its functionality. Observing the maximum loading of the armrest is strongly recommended. Vertical adjustment By pressing the lever in front of the arm rest and by pressing the arm rest, the arm rest may... -
Page 31: Siderails (Pair)
OPTIONAL ACCESSORIES Siderails (pair) WARNING! Ensure that the siderails are always properly secured in the armrests and in the brackets on the sides of the seat. Attaching the side rails: ► Fold the armrest to the rear outermost position. ► Insert the siderail into the hole in the armrest and into the bracket on the side of the seat. - Page 32 Table safety lock The safety lock is used to secure the table in the armrests. Table holder CAUTION! The table holder can´t be used together with the armrests for the blood donation or the stacking pocket. Procedure: ► Because of safe installation, always slip the table into the holder with stainless steel interposer bars directing to the right (Fig.
-
Page 33: Telescopic Infusion Stand
Telescopic Infusion stand WARNING! ► Maximum bearing capacity of the stand is 30 kg! ► Maximum bearing capacity of one hook is 2 kg! The infusion stand is inserted into the holder on the chair undercarriage. Without this holder it is not possible to attach the infusion stand to the chair. -
Page 34: Headrest, Big
8.10 Headrest, big 8.11 Prolonged stripe for headrest 8.12 Urine bag holder CAUTION! Ensure the hose from the urine bag is the right length and is routed so that it does not pinch. The urine bag holder is located on the backrest of the chair. This holder cannot be combined with the table holder. -
Page 35: Stacking Pocket
8.13 Stacking pocket 8.14 Horizontal oxygen bottle holder, Holder for hanging oxygen bottle WARNING! Be especially careful when transporting the chair and the oxygen bottle. The oxygen bottle may fall out when the back side is reclined and upon incautious manipulation. -
Page 36: Patient's Belt
8.15 Patient’s belt It secures a patient against falling-down from an arm-chair by clamping him/her over the belly or the breast by means of Velcro. The belt width is 15 cm and the belt length is 180 cm. Belt colour depends on the arm-chair leatherette colour. -
Page 37: Care
9 Care CAUTION! ► All L I N E T spol. s r. o. products are designed for many years of service under the condition of correct use. Please use your chair and its accessories with care. ► Please follow this instruction manual and the herein described operation procedures. -
Page 38: Recommended Disinfection
CAUTION! When cleaning and disinfecting, pay attention to the materials used! See the following table for information: COMPONENTS OF THE CHAIR MATERIALS USED Upholstery seat, backrest, headrest, legrest, Polyvinylchloride (PVC) siderails, headrest extension, horizontal oxygen bottle holder Undercarriage construction, frame Painted steel construction, urine bag holder, table holder, holder for hanging oxygen bottle... -
Page 39: Cleaning The Leatherette Upholstery
Cleaning the leatherette upholstery CAUTION! Risk of property damage caused by improper cleaning/disinfection! ► Always wipe and dry the leatherette upholstery before putting it back into service, even if the cleaner instructions say that this is not required. ► Put the upholstery on dry chair areas only! Parts of the leather upholstery Recommended Cleaning Agents (General cleaning) that need to be cleaned... -
Page 40: Cleaning The Multifunctional Chair Sella
Cleaning the multifunctional chair Sella Prepare for cleaning as follows: ► Put the mattress support platform in the highest position. ► Lock the brakes on the chair. 9.4.1 Cleaning before changing patients Clean the following chair parts: ► All control levers for adjusting the chair ►... -
Page 41: Maintenance
274 01 Slaný Tel.: +420 312 576 111 Fax: +420 312 522 668 http://www.linet.com Service department: service@linetgroup.com For repairs only use original L I N E T spol. s r. o. spare parts and use the services of trained service technicians licensed to repair products of this type. -
Page 42: Technical Specification
11 Technical specification 11.1 Mechanical specifications Fixed version Fixed version Lift version Chair version without CCC with CCC with CCC Total length when lying 1636 mm Minimum length in the default position 910 mm Seat length 450 mm Backrest length 790 mm Legrest length 345 mm... -
Page 43: Transport, Storage And Operation Conditions
11.2 Transport, storage and operation conditions Packed chairs may be exposed for a period of up to 15 weeks in conditions that do not exceed the following limits: Operation conditions 10 °C – 40 °C, 30 % – 75 %, 795 hPa – 1060 hPa -10 °C –... -
Page 44: Environmental Protection And Disposal Of The Product
12.2 Disposal Materials used in this product and in the LINET® accessories burden the environment but at the same time the whole range of these materials can be very effectively reused and recycled. Me- chanical disassembly of the product and material sorting into the basic waste types (plastic, metal, wooden materials) should be performed after the end of product life. -
Page 45: Warranty
13 Warranty LINET® will only be held responsible for the safety and reliability of products that are regularly ser- viced, maintained and used in accordance with the safety guidelines. Should a serious defect arise that cannot be repaired during maintenance: ►...
Need help?
Do you have a question about the Sella and is the answer not in the manual?
Questions and answers