Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Odys XP27-F-180
Summary of Contents for Odys XP27-F-180
- Page 1 ODYS Q27-X...
- Page 2 V1.0.0 ODYS XP27-F-180 Table of contents Inhaltsverzeichnis ............2 1 Wichtige SicherheitshinweiseFehler! Textmarke nicht definiert. 2 Kundendienst ..Fehler! Textmarke nicht definiert. 3 Bestimmungsgemäßer GebrauchFehler! Textmarke nicht definiert. 4 KonformitätserklärungFehler! Textmarke nicht definiert. 5 Montage ....Fehler! Textmarke nicht definiert.
- Page 3 ODYS XP27-F-180 Important safety instructions 1) Read these instructions. 2) Follow these instructions. 3) Observe all warnings. 4) Follow all instructions. 5) Do not use the appliance in the immediate vicinity of water. 6) Only clean the appliance with a soft cloth.
- Page 4 ODYS XP27-F-180 14) The appliance is completely disconnected from the mains by pulling out the mains plug. The socket must be freely accessible at all times during operation. 15) Do not place naked flames (such as candles) on the appliance.
- Page 5 ODYS XP27-F-180 Warning High-voltage components are built into this appliance. Do not remove the housing on the back. Leave repairs to qualified service personnel. To prevent fire or electrical voltage, never expose the appliance to rain or moisture. Do not throw any objects against the device, into the housing or into other openings of the device.
- Page 6 ODYS XP27-F-180 If the monitor is to be placed in a cabinet or similar enclosure, the minimum clearances must be observed. Heat build-up can limit the service life of the product and become dangerous. Correct disposal of old appliances The symbol of the crossed-out wheeled garbage can on an...
- Page 7 ODYS XP27-F-180 Customer service On our website you will find the latest information about this device, about other products from our company and about our company itself. If you have any questions or problems, please read the FAQs on our website or contact our customer service department.
- Page 8 ODYS XP27-F-180 Intended use This monitor is intended for displaying the screen content of a computer via the available interfaces. Intended for private use. It is intended exclusively for this purpose and may only be used for this purpose. This also includes observing all the information contained in these operating instructions, in particular the safety instructions.
- Page 9 ODYS XP27-F-180 Assembly Stand assembly Use the enclosed screws to connect the stand. Then insert the stand into the holding device on the back of the device at an angle of >30° as shown. You can now lock the device into place.
- Page 10 ODYS XP27-F-180 Wall assembly Attach your wall bracket to the threads provided on the back. Observe the hole spacing of 100 x 100 mm.
- Page 11 ODYS XP27-F-180 Operating elements and connections Connections in the following order: 1. Display Port 2. HDMI 3. Headphone output 4. USB 5. Power connection...
- Page 12 ODYS XP27-F-180 The functions of the buttons In the menu Menu button: Press this button to call up submenus or to quickly access the main menu. ◄ Press to go down in the menu/quickly adjust the crosshairs of the game ►...
- Page 13 ODYS XP27-F-180 Menu settings Press the menu button and the ▲▼ buttons to select a setting. Input source HDMI or DP selectable Brightness/contrast Brightness & contrast adjustable from 0-100 or DCR Color settings Gamma, view mode, color temperature, hue, saturation...
- Page 14 ODYS XP27-F-180 Brightness/contrast The second menu item is the Brightness/Contrast menu. You can set the brightness and contrast of the screen here. Press the ▲▼ buttons to select a setting, press the ◄► buttons to change the setting and Enter to confirm.
- Page 15 ODYS XP27-F-180 Color settings The third menu item is the Color settings menu. Press the ▲▼ buttons to select a setting, press the ◄► buttons to change the setting and Enter to confirm. Description of the individual menu items Gamma Correction of color tones (optimum value 2.2)
- Page 16 ODYS XP27-F-180 Picture format The fifth menu item is the Picture format menu. Here you can adjust the aspect ratio. Description of the individual menu items Aspect ratio Widescreen (16:9) / Audio settings The sixth menu item is the Audio settings menu. Here you can adjust the volume or mute the volume.
- Page 17 Reset Reset Standby The ODYS XP27-F-180 has a built-in standby function. This is activated automatically after the monitor has detected no signal. This happens approx. 10 seconds after there is no signal and is announced with the messages “No signal” and then “Energy...
- Page 18 ODYS XP27-F-180 Troubleshooting Display Possible cause Solutions Check the input source An unused input has using the SOURCE button. been selected or the Check the display cable. No signal display cable is damaged. Check that the display and the junction box are...
- Page 19 ODYS XP27-F-180 Specifications Screen size 27” Point of view H:178º,V:178º（CR>10） Response time (screen) 5ms (OD 2ms) Contrast rate 4000:1 Optimum working resolution 1920×1080@180Hz ⎓ Input voltage DC 12V/4.5A Working environment conditions 0℃~40℃ 20%~85% Storage conditions -10℃~60℃ 10%~90% Device weight 5,2 kg Specifications are subject to change without notice.
- Page 20 ODYS XP27-F-180 Product information on the energy efficiency of this appliance in accordance with EU Regulation (EU) 2019/2013 can be found on the following European Union website from 01.03.2021. To open it, please scan the following QR code with your cell phone.
- Page 21 Axdia International GmbH, Hanns-Martin-Schleyer-Straße 36-38, 47877 Willich, Germany, hereinafter referred to as AXDIA, provides consumers with a limited warranty for ODYS and DYON brand products, hereinafter referred to as the product, as set forth in the following warranty terms. Under this warranty, AXDIA...
- Page 22 ODYS XP27-F-180 with supplementary parts or accessories that are not matched to our products. 6. Warranty services do not extend the warranty period, nor do they start a new warranty period. The warranty period for installed spare parts ends with the warranty period for the entire product.
- Page 23 ODYS XP27-F-180 specified by the AXDIA Service Center. 2. the RMA number must be marked visibly and legibly on the outside of the packaging. 3. a copy of the proof of purchase must be enclosed as proof of warranty. 4. upon receipt of the returned product, AXDIA will provide a warranty in accordance with the warranty conditions and return the product carriage paid and insured.
Need help?
Do you have a question about the XP27-F-180 and is the answer not in the manual?
Questions and answers