Do you have a question about the OFF-ROAD BNLT-BR-21-BUS and is the answer not in the manual?
Questions and answers
Summary of Contents for borne OFF-ROAD BNLT-BR-21-BUS
Page 1
RESOURCES & CONTACT INFO CALL 1.877.466.4744 CUSTOMER SERVICE HOURS: MON–FRI 8:30AM–5:00PM EST IMPORTANT SAFETY INFORMATION INSTALL TIME & DIFFICULTY @BORNEOFFROAD SUPPLIED PARTS REQUIRED TOOLS @BORNEOFF-ROAD DISPOSAL & WARRANTY INFORMATION BORNEOFFROAD @BORNEOFFROAD ENGINEERING BLOG W W W.BORNE.COM/ENGINEERING BORNE OFF-ROAD 1.877.466.4744 SUPPORT@BORNE.COM WWW.BORNE.COM...
› serious damage can occur Please dispose of any liquids properly › Borne Off-Road is not responsible for any vehicle damage or › personal injury due to installation errors, misuse, or removal of Borne Off-Road products If you need any assistance while installing our products, ›...
Page 3
Fasten the positive (red) bus bar to the rearward position on the bus bar bracket using four of the provided M4 bolts. Fasten the neg- Connect all Borne Off-Road lighting/accessory positive and ative (black) bus bar to the forward position on the bus bar bracket negative ring terminals to the remaining bus bar terminal posts.
Page 4
DIRECT-FIT BUS BAR KIT FITS 2021+ FORD BRONCO INSTALLATION INSTRUCTIONS Remove panels from the bus bar covers for wire clearance. Using a pair of side/diagonal cutters, cut a 15mm deep notch into the fuse panel cover in the location shown in the images below. This notch is necessary to provide clearance for the positive battery cable previously installed in step 7.
DIRECT-FIT BUS BAR KIT FITS 2021+ FORD BRONCO DISPOSAL INSTRUCTIONS & WARRANTY INFORMATION DISPOSAL INSTRUCTIONS Do not dispose of any product as unsorted municipal waste. Use › separate collection facilities. Contact your local authority for information regarding the collection systems available. Never improperly dispose of any coolant, oil, or other chemicals.
Need help?
Do you have a question about the OFF-ROAD BNLT-BR-21-BUS and is the answer not in the manual?
Questions and answers