Advertisement
Quick Links
Advertisement
Summary of Contents for Akai AKE440B-54M-H8N
- Page 1 PROTECT YOUR WARRANTY This unit must be installed by a registered, licensed installer as required by Government regulations. Solar Module Installation Manual Model Number: AKE440B-54M-H8N/AKE445B-54M-H8N/AKE450B-54M-H8N/AKE485B-60M-H8N/ AKE490B-60M-H8N/AKE495B-60M-H8N/AKE585B-72M-H8N...
- Page 2 Tempo (Aust) Pty Ltd INSTALLATION INSTRUCTION MANUAL CRYSTALLINE PV MODULE 1. INTROUDUCTION TEMPO (AUST) PTY LIMITED is a high-tech company engaged in development, research, production, sales, and service of solar panels, and photovoltaic systems. Our solar panels are widely used in commercial, residential and industrial solar power systems (on-grid &...
- Page 3 Tempo (Aust) Pty Ltd 2. APPLICATIONS TEMPO Solar PV modules are a highly reliable, virtually maintenance-free direct current (DC) power source, designed to operate most efficiently in sunlight. TEMPO series modules are ideal to power remote homes and other applications. The application level of TEMPO solar photovoltaic modules is class II: hazardous voltage, dangerous use power (higher than 240W).
- Page 4 Tempo (Aust) Pty Ltd photovoltaic modules are tested with IEC61215-1:2021, IEC61215-1-1:2021, IEC61215-2:2021, IEC61730-1:2023, IEC61730-2:2023. 3. PERMIT Before installing your system, contact local authorities to determine the necessary permit, installation and inspection requirements. 4. CLIMATE CONDITION Install the TEMPO Solar crystalline series modules in the following conditions: Ambient temperature: -20°C to +40 °C •...
- Page 5 Tempo (Aust) Pty Ltd voltage power supply (directly or indirectly) can cause serious injury or death. • Tools: When working with high voltage and AC power, be sure to only use the required, special-purpose tools. • Static electricity: Any static electricity could damage veneer on the electrostatic sensitive components.
-
Page 6: Required Information
Tempo (Aust) Pty Ltd optimized by connecting the different orientations to different inverters (or different MPPT if the inverter has more than one MPPT). Refer to inverter guidelines for further information. • Personnel: More than one person may be required to install this PV module. All personnel must be licensed installers. - Page 7 Tempo (Aust) Pty Ltd No modules in series Open circuit voltage of each module (refer to product label or data sheet) TCvoc Thermal coefficient of open circuit voltage for the module (refer to data sheet) Tmin The lowest ambient temperature Notes: Recommended maximum series/parallel module configurations 144 half cut cells family (26PCS) 132 half cut cells family (28PCS)
-
Page 8: Mounting Instruction
Tempo (Aust) Pty Ltd It may not be possible to install solar panels in regions where maximum snow accumulation • exceeds the maximum allowable load. 8. MOUNTING INSTRUCTION • applicable regulations pertaining work safety, accident prevention securing the construction site must be observed. Workers and third-party personnel shall wear or install fall arrest equipment. - Page 9 Tempo (Aust) Pty Ltd Bolt installation diagram For your reference, please use the components specified below: 1, Bolt – 8pcs Material:SU304; Size:M8 2, Washer – 8pcs Material:SU304; Size:M8; thickness≥1.5mm, outside diameter≤16mm 3, Spring Washer – 8pcs Material:SU304; Size:M8 4, Nut – 8pcs Material:SU304;...
- Page 10 Tempo (Aust) Pty Ltd The frame of each module has 8 mounting holes (14mm*9mm) used to secure the modules to supporting structure. The module frame must be attached to a supporting structure using M8 stainless steel hardware together with spring washers and flat washers in eight places symmetrical on the TEMPO module.
-
Page 11: Installation Work
Tempo (Aust) Pty Ltd Attach a separate conductor as grounding wire to one of the 4 mm diameter grounding marked on the module frame with a set of M4 screw, cup washer, flat washer, tooth washer, and M4 nut. This is to ensure positive electrical contact with the frame. - Page 12 Tempo (Aust) Pty Ltd There is a cable (+) and a cable (-) on the rear side of each solar panel. Connect the • waterproof connectors on these cables, making sure to push the connectors all the way • On the first solar panel, connect the positive home run cable to the positive array output cable, and connect the negative cable to the positive cable of the second solar panel.
- Page 13 Tempo (Aust) Pty Ltd Do not clean the modules without professional authorization and ensure the appropriate • facilities to conduct security operations and aerial work with high-altitude awareness of the danger. Checking the glass for cracks and damage before cleaning the module. If the modules have •...
- Page 14 Performance AKE440B-54M-H8N AKE445B-54M-H8N AKE450B-54M-H8N AKE485B-60M-H8N Model Number Test Conditions NOCT NOCT NOCT NOCT Maximum Power(W) 332.1 335.9 339.7 366.1 Short-circuit Current (A) 14.41 11.70 14.54 11.81 14.63 11.88 14.34 11.65 Open-circuit Voltage (V) 38.86 36.81 39.01 36.95 39.16 37.09 43.09 40.81...
- Page 15 Performance AKE490B-60M-H8N AKE495B-60M-H8N AKE585B-72M-H8N Model Number Test Conditions NOCT NOCT NOCT Maximum Power(W) 369.9 373.6 441.6 Short-circuit Current (A) 14.41 11.70 14.49 11.77 14.39 11.69 Open-circuit Voltage (V) 43.24 40.95 43.39 41.10 51.47 48.75 Maximum Power Current (A) 13.64 11.06 13.72 11.12 13.63...
Need help?
Do you have a question about the AKE440B-54M-H8N and is the answer not in the manual?
Questions and answers