Do you have a question about the PC and is the answer not in the manual?
Questions and answers
Summary of Contents for CINOART PC
Page 1
CINOART PC CINOART Portafi lter Cleaner — Automatic Portafi lter Cleaner Product Manual V 1.0...
Page 2
PC FEATURES Silicon Brush Spring Brush Outter Diameter Adjustable Screw Shell Outter Diameter Wings Silicon Brush Spring Same Direction Brush...
DIMENSIONS AND PARAMETERS 141~168mm 141~168mm 230mm Product Name Automatic Portafilter Cleaner Model CINOART PC Size L141 * W141 * H230mm Voltage AC100~240V 50/60Hz Power Weight...
SET-UP AND BASIC ADJUSTMENT CINOART automatic Portafilter Cleaner can be placed on the worktable, and it is also compatible with the knock tubes. If the outer diameter of the cleaner cannot be adjusted to a suitable size, it cannot be placed in the knock tube.
Page 5
Put the CINOART PC into the hole and fi x it on the worktable 2. Install the CINOART PC into the knock tube 2.1 Adjust the outer diameter of the cleaner according to the knock tube diameter; 2.2 Put the cleaner into the knock tube;...
USE ENVIRONMENT Please place the CINOART portafilter cleaner (knock tube) on a level, non- vibrating surface, so as not to shake the cleaner (knock tube)) during use, damage the cleaner or reduce the service life of the cleaner INSPECTION BEFORE SUE 1.
Reference line Cut off the excess part according to the reference line, and make sure the silicone top of the brush head is smaller than the inner diameter of the bottom of the basket The silicon brush need to be The silicon brush can access to cut to access to the Inward the Inner wall vertical basket...
Do not attempt to repair it yourself in case of electrical fault. SPARE PARTS Please contact your CinoArt supplier / distributor if you require some spare parts such as the new brush head. All Spare Parts in general can be ordered from your supplier / distributor.
Need help?
Do you have a question about the PC and is the answer not in the manual?
Questions and answers