en Safety Futher information and explanations are available online: 1.2 Intended use Table of contents Only a licensed professional may connect ap- Safety .............. 2 pliances without plugs. Damage caused by in- correct connection is not covered under the Avoiding material damage........ 4 warranty.
Safety en The appliance becomes hot during operation. provided that they are supervised or have ▶ Allow the appliance to cool down before been instructed on how to use the appliance safely and have understood the resulting cleaning. Metal objects on the hob quickly become very dangers.
en Avoiding material damage An appliance with a cracked or broken sur- WARNING ‒ Risk of injury! face can cause cuts. Saucepans may suddenly jump due to liquid ▶ Do not use the appliance if it has a cracked between the saucepan base and the hotplate. or broken surface.
Environmental protection and saving energy en 3 Environmental protection and saving energy 3.1 Disposing of packaging Lift lids as infrequently as possible. ¡ When you lift the lid, a lot of energy escapes. The packaging materials are environmentally compat- ible and can be recycled. Use a glass lid.
Page 6
en Suitable cookware Notes ¡ Do not use adapter plates between the hob and the cookware. ¡ Do not heat up empty cookware and do not use cookware with a thin base, as this may become very hot.
Familiarising yourself with your appliance en 5 Familiarising yourself with your appliance frying, energy savings as well as greater ease of clean- 5.1 Cooking with induction ing and care. It also offers improved heat control as the In comparison to conventional hobs, induction techno- heat is generated directly in the cookware.
en Basic operation 5.4 Cooking zone 5.5 Residual heat indicator Before you start cooking, check whether the size of the The hob has a residual heat indicator for each cooking cookware fits the cooking zone that you want to use for zone. Do not touch the cooking zone if the residual cooking: heat indicator is lit.
en Roasting zone 7 Roasting zone If the cookware completely covers the cooking zone, 7.1 Activating the roasting zone an auxiliary inductor is switched on and the cooking Completely cover the cooking zone with the cook- zone is increased. ware. Position the cookware: Select the cooking zone and set the power level.
Childproof lock en 10 Childproof lock The hob is equipped with a childproof lock. This pre- 10.2 Switching off Childproof lock vents children from switching on the hob. Touch and hold for 4 seconds. ▶ a The lock is released. 10.1 Switching on Childproof lock Requirement: The hob must be switched off.
Remove heavy soiling using a glass scraper. ATTENTION! Clean the hob with a cleaning agent for glass Unsuitable cleaning products may damage the sur- ceramic.
en Disposal 16.2 Information on the display panel Fault Cause and troubleshooting No displays light up. The power supply has been disconnected. Use other electrical appliances to check whether there has been a power failure. ▶ The appliance has not been connected as shown in the circuit diagram. Connect the appliance in accordance with the circuit diagram.
Customer Service en 18 Customer Service Function-relevant genuine spare parts according to the 18.1 Product number (E-Nr.) and production corresponding Ecodesign Order can be obtained from number (FD) Customer Service for a period of at least 10 years from You can find the product number (E-Nr.) and the pro- the date on which your appliance was placed on the duction number (FD) on the appliance's rating plate.
Page 16
en Test dishes 19.6 Cooking rice pudding without a lid Milk temperature: 7 °C 1. Add the ingredients to the milk and heat the mixture up while stirring continuously. 2. Once the milk has reached approx. 90 °C, select the recommended power level and leave it to simmer on a low heat for approx.
Page 20
Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service directory.
Need help?
Do you have a question about the PIF F Series and is the answer not in the manual?
Questions and answers