Source SFL 10W-20W BL Installation Manual

Product Information Sheet
COMMISSION DELEGATED REGULATION (EU) 2019/2015 with regard to energy labelling of light
sources
Supplier's name or trade mark: Source
Supplier's address: SGD, Unit 7/8 Ashbourne Business Centre Ballybin Road Ashbourne Co. Meath
Ireland A84YP58
Model identifier: SFL 10W-20W WH/BL
Type of light source:
Lighting technology used:
Light source cap-type
(or other electric interface)
Mains or non-mains:
Colour-tuneable light source:
High luminance light source:
Anti-glare shield:
Parameter
Energy consumption in on-
mode (kWh/1000 h), rounded
up to the nearest integer
Useful luminous flux (ɸuse), in-
dicating if it refers to the flux in
a sphere (360º), in a wide cone
(120º) or in a narrow cone (90º)
On-mode power (P
pressed in W
Networked standby
(P ) for CLS, expressed in W
net
and rounded to the second dec-
imal
Outer dimen- Height
sions without
Width
separate con-
Depth
trol gear, light-
LED
Floodlight
MLS
No
No
No
Product parameters
Value
General product parameters:
20
2 400 in Wide
cone (120°)
), ex- 20,0
on
power -
148
123
30
Non-directional or
directional:
Connected light
source (CLS):
Envelope:
Dimmable:
Parameter
Energy efficiency
class
Correlated colour
temperature,
rounded to the near-
est 100 K, or the
range of correlat-
ed colour temper-
atures, rounded to
the nearest 100 K,
that can be set
Standby power (P ),
sb
expressed in W and
rounded to the sec-
ond decimal
Colour rendering in-
dex, rounded to the
nearest integer, or
the range of CRI-val-
ues that can be set
Spectral power dis-
tribution in the
range 250 nm to 800
nm, at full-load
NDLS
No
-
No
Value
E
3 000 or 4
000 or 5 000
-
80
See image
in last page
Page 1 / 4