Summary of Contents for Cedima C-BMS 350
- Page 1 Translation of the original operating instructions C-BMS 350 Core drilling machine Serial number range: 3500100 - 3500XXX Amendment index 001 • date of issue: 11/04/2014 English...
- Page 2 Subject to change without prior notice. Suggestions and ... for this documentation or machine, send to the address above. pointers 11/04/201 Most recent amendment Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014...
-
Page 3: Table Of Contents
6.1 Operation with drill stand ..........................27 6.2 Adapter – Mount water connection ......................28 6.3 Mounting core drill ............................29 Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014... - Page 4 8.2 Rectifying faults and malfunctions ......................34 8.3 Maintenance schedule ..........................37 8.4 Storing when not in use ..........................39 8.5 Disposal ................................39 Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014...
-
Page 5: Product Information
1.2 Type label You will find the type label of the machine at the following location: Location of type label (side view) Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014... -
Page 6: Technical Data
4 bar Gear oil type Filling quantity of gear oil 500 ml Environment Acoustic pressure level at workstation 89.8 dB [A] Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014... -
Page 7: Scope Of Delivery
"Maintenance, Repairs and Decommissioning“ > "Spare parts list“ (page 40). You can request optional accessory parts directly at CEDIMA® Diamantwerkzeug- und Maschinenbaugesellschaft mbH. Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014... -
Page 8: Eu Declaration Of Conformity
As soon as the machine is substantially modified, this declaration expires. A new conformity procedure in accordance with the EU machine directive is required. Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014... -
Page 9: Information For The Reader
Safety note: Special note for an informative section. Explanation of the note. • The point marks the measures to take the note into consideration. Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014... -
Page 10: Warnings
Failure to heed the warning can result in serious damage to the machine or its environment. The arrow marks a precautionary measure which you should take to avert the risk. Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014... -
Page 11: Safety
Safety devices do not work or have been removed. • Malfunctions have been detected. • Damage has been detected. • Maintenance intervals have been exceeded. Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014... -
Page 12: Instructions For Operation
3.1.4 Instructions on using accessories and tools If accessories or tools are inserted, the machine safety devices must not be put out of operation. Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014... -
Page 13: Instructions On Environmental Protection
Smooth operation of machine (page 15) 3.2.1 Planning and checking safety measures The duty of the operator is subject to planning measures and checking their implementation. Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014... -
Page 14: Minimising Risks Of Injury
Carry out maintenance measures in an appropriate room with workshop equipment and corresponding qualified personnel! • Ensure that the machine is switched off properly and that it is not permanently connected! Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014... -
Page 15: Operating The Machine Smoothly
• Sufficient training in order to perform work at the machine under the supervision and guidance of a trained specialist. Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014... -
Page 16: User Groups
Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014... -
Page 17: Safety Devices
The power supply of the ‹M › is interrupted. ACHINE ‹I › goes out. NDICATOR The ground-fault circuit interrupter is tripped. Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014... -
Page 18: Reset Ground-Fault Circuit Interrupter
Warning signs on the machine Warning sign Meaning Side length Instructions and Width: 60.5 mm prohibitions concerning Height: 41 mm safe handling of the machine. Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014... -
Page 19: Residual Hazard
Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014... -
Page 20: Machine Overview
Any other use or use beyond what is specified is deemed to be not for the intended purpose. The manufacturer shall not be liable for damage arising from unintended use of the machine. Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014... -
Page 21: Parts Of The Machine
The safety switch must be pressed so that the selector switch - rotating speed can spin in the desired rotating speed. Level Used to align the machine horizontally. Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014... - Page 22 Water connection The supplied adapter is connected to the water connection - water connection for water cooling is connected. Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014...
- Page 23 - No voltage is present in the • machine. light up - Voltage is present in the machine. • Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014...
- Page 24 The water hose is connected to the hose connection. Ball-valve Used to open and close the water supply. Adapter The adapter is used to connect to the machine. Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014...
-
Page 25: Work And Hazardous Areas
For operation, the machine must be mounted in a drill stand. During operation, an operator is prescribed for monitoring and intervening in the work process. Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014... -
Page 26: Transporting And Unpacking
Dispose of the packing material according to the applicable regulations. Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014... -
Page 27: Set Up
› ‹C › ‹D ›. Check that the is firmly fitted in the in the ACHINE OLLET RILLING STAND Finish Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014... -
Page 28: Adapter - Mount Water Connection
screw the ‹A – W › into the ‹W › DAPTER ATER CONNECTION ATER CONNECTION of the machine. Finish Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014... -
Page 29: Mounting Core Drill
‹O › ORE BIT PEN-END SPANNERS Use the open-end spanner (SW 32 mm) to secure it to the machine. Finish Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014... -
Page 30: Operation
Do I know how I should behave in the event of accidents? • • Is the connection cable of the machine in perfect condition? Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014... -
Page 31: Establishing Operational Readiness
Ensure a permanent water supply for cooling the core bit. Is water flowing from the indicator hole? The machine water seal is faulty! C ontact the manufacturer. Finish Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014... -
Page 32: Perform Drilling Process
During work, ensure that the connection cable is protected from heat, oil and sharp edges. The drilling process is carried out. Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014... -
Page 33: Rectify Operational Malfunctions
DAMP LOTH ACHINE Using the ‹ › , clean the ‹C ›. DAMP LOTH NONNECTION CABLE OF THE ACHINE Finish Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014... -
Page 34: Maintenance, Repair And Decommissioning
The problems and their possible causes are mainly in natural wear and in the unintended use of the machine and the diamond cutting disks. • Read the operating instructions before cutting. Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014... - Page 35 (bearing) is workshop, specialist and CEDIMA®. damaged or bent. The core bit is overheated. Optimise the cool and rinse water supply. Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014...
- Page 36 Optimise the cool water supply. colour. The core bit has too much See "The drilling process is not optimal". side friction on the pipe. Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014...
-
Page 37: Maintenance Schedule
Depending on load and condition Depending on how severe (the extent of) the damage is ***) Servicing by Cedima or authorised specialised workshop Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014... - Page 38 The table can be updated at any time by CEDIMA® (for example appropriate requirements and developments)! Find out from CEDIMA®. Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014...
-
Page 39: Storing When Not In Use
• Comply with the locally applicable regulations on disposal. • Dispose of all parts in accordance with the locally applicable regulations. Cedima • Technical documentation • Core drilling machine C-BMS 350 • 3500100 - 3500XXX • Date of issue: 11/04/2014... - Page 40 ® CEDIMA Diamantwerkzeug- und Maschinenbaugesellschaft mbH, Lärchenweg 3, D-29227 Celle Tel.: +49 (0)5141 88 54 - 0 • Fax +49 (0)5141 86 427 info@cedima.com • www.cedima.com...
Need help?
Do you have a question about the C-BMS 350 and is the answer not in the manual?
Questions and answers