Do you have a question about the DMD134 and is the answer not in the manual?
Questions and answers
Summary of Contents for DMD DMD134
Page 1
Socket Tank Thank you for purchasing this Electric Window Cleaner from DMD Collective. The window cleaner is exclusively designed for wet-cleaning windows, tiles or mirrors and other smooth surfaces, Please read through all the information in this document and keep it for future reference.
Health and Safety Guidelines • Always unplug the unit when not in use, before cleaning, or when adding or removing parts. Please read the instructions carefully before using any appliance. • Always ensure that the voltage on the rating label corresponds to the mains voltage in your home.
Page 3
• The batteries installed in the window cleaner shall not be exposed to excessive heat such as sunshine, fire or the like. • This appliance contains batteries that are non-replaceable. • Only use the window cleaner on smooth, wet-pre-cleaned surfaces. The squeegee lip will otherwise wear and become physically damaged.
Page 4
Assemble The Spray Bottle Prior to using the window cleaner, you should wet-clean the relevant surfaces. For this, use the spray bottle and the mountable wiping attachment. Attach the mounting ring to the thread of the water bottle. The recesses in the mounting ring must point towards the sides.
Page 5
Pull the microfibre cover over the bracket of the wiping attachment and secure it with the Velcro fastener (Fig. 4). Velcro Fastener Microfibre Cover Wiping Attachment Spray the surfaces to be cleaned liberally. Wipe over the surfaces, which have been sprayed with the microfibre cover, in order to clean them.
Emptying The Water Tank Switch the window cleaner off. Remove the water storage tank of the window cleaner by holding the recessed grips and pull the tank out of the device at an angle towards the front and down. Turn the non-return valve counterclockwise and remove it (Fig. 5). Empty out the dirty water.
Page 8
IPX4 Ace Supply Co Ltd., Suite GA, Marsland House Marsland Road, Sale M33 3AQ For Product Support: E: support@dmdcollective.co.uk T: +44 (0)161 447 8597 EU Regd. Address: Ace Supply Co (Europe) Ltd., 25 Herbert Place, Dublin 2, D02 A098 Republic of Ireland www.dmdcollective.co.uk...
Need help?
Do you have a question about the DMD134 and is the answer not in the manual?
Questions and answers