Page 2
Index Introduction ....................... 2 How to use......................... 2 Recognizable Colors ....................2 Conversion Ratio from Input to Output Pulses ............2 Connector ......................3 Document Code: GM-HLP-0280-2402-025-00...
Page 3
This manual provides instructions for using the product. Please read it before use. 1 Introduction The PC-100 is a portable sensing head with TTL output. It is designed to detect LED flashes in meters, such as electricity meters. The device features a small, lightweight housing made of rugged ABS and Polycarbonate filter material.
Page 4
Additionally, the sensor stores the current status in its internal memory after each conversion ratio change and resumes operation with the same conversion ratio upon restart. 2.3 Connector The PC-100 does not feature a connector, but instead utilizes a three-wire cable as outlined in the table below. Old wire...
Need help?
Do you have a question about the PC-100 and is the answer not in the manual?
Questions and answers