Accessories and Tools Included Accessories Hook-side Velcro Expansion plugs Screws Required Tools Level Drill Tape measure...
Page 3
Installation steps Choose a Flat and Solid Wall. Based on the pre-marked layout, position the acoustic panels. Use a level to ensure the installation surface is horizontal.
Page 4
Installation steps Mark Drilling Positions. After marking the positions for the acoustic panels, measure the spots where the Velcro needs to be attached based on the size indications in the diagram. Velcro...
Page 5
Installation steps 02.1 Mark Drilling Positions. For acoustic panels with more than four Velcro pieces on the back, measure the distance between the Velcro pieces and mark the drilling positions on the wall.
Page 6
Installation steps Marking. Ensure accurate measurement and marking.
Page 7
Installation steps Drill Holes. Use a drill to create holes at the marked positions.
Page 8
Installation steps Insert Expansion Plugs. Insert expansion plugs into the pre-drilled holes. Use screws to secure the hook-side Velcro through the middle hole, firmly attaching it to the wall.
Page 9
Installation steps Attach Acoustic Panels. Align the Velcro (the softer side) on the back of the acoustic panel with the previously fixed hook-side Velcro. Press firmly to ensure a tight fit. Move slightly up and down to ensure a strong connection...
Installation Recommendations If you are installing multiple acoustic panels in a combination pattern, we recommend leaving a 9mm or 12mm gap between each panel to create a stylish line effect, adding a more modern aesthetic. There is no need to tightly fit the panels together, appropriate spacing will enhance the unique characteristics of your decor.
Page 11
These are the installation steps. Ensure to follow them in order for a secure installation. If you have any questions, please feel free to contact us. hello@mukavaacoustics.com...
Need help?
Do you have a question about the Velcro and is the answer not in the manual?
Questions and answers