Simagic Neo X User Manual page 8

3.1 Quick Guide
Steering Wheel Function Shortcuts
Clutch Calibration Mode
Push both 7-way switches upward
for 5 seconds to enter clutch
calibration mode. Press each clutch
paddle fully once to complete
calibration.
Note: The paddle module with
clutch paddles must be installed.
Steering Wheel Adjustment
① Remove the two screws
② Take off the paddle cover
Paddle Shifter Module
Installation
Factory Reset
Press and hold for 5 seconds to
restore factory settings (for the
steering wheel only).
③ Connect the wire to the terminal socket
④ Position the paddle module
⑤ Tighten the two screws
Neo X
USER MANUAL
08