NexiGo NG17QH Manual

Shape and Interface Distribution

1. 3.5mm Headphone Jack
2. USB OTG Port (No function when HDMI connection)
   Suitable for mouse, keyboard and other USB devices connection
3. Multi-Function Key
   1. Press to display the OSD menu
   2. Scroll up/down to navigate the OSD menu
4. Indicator Light
5. Power Button
   1. Long press for 5 seconds to turn off the portable display
   2. Single press to go to the previous menu of the OSD menu
6. Mini HDMI Port
7. Full Function Type-C Port
   Use the 30W or above adapter to power the display
8. Built-in Dual Speakers
9. 1/4" Thread Hole
10. VESA Mount Holes (75x75 mm)

What's in the Box

Devices Connection Instructions

For brightness and/or volume adjustments above 80% the display needs to be connected to an external power supply in addition to the data signal.

1. Connect a computer using a full function USB Type-C port
   
   Note: When the device battery drops below 30%, an external power supply is required for the monitor to function. When the device's battery is above 30%, the device will power the display and automatically activate the energy saving mode on the monitor. This will set the brightness of the display to low. You may adjust the display brightness and volume as needed on your device.
   
   The mouse or keyboard is connected to the USB OTG port through an adapter (not included) to control the screen.
2. Connect a phone using a full function USB Type-C port
   When connecting the monitor to a Phone using a Type-C cable, you will need to power the monitor first using the provided wall charger. Please connect power before the Type-C signal.
   
3. Connect to a computer using an HDMI cable
   The display is compatible with most HD devices using an HDMI cable. When connecting the monitor to a computer using an HDMI cable, you will need to power the monitor first using the provided wall charger. Please connect power before the HDMI signal.
   
4. Connect to other device using an HDMI cable
   
   
   Note: For proper functionality with all devices, please connect the unit to the external power if needed before connecting the data cable.

Reverse Charging Function

You can use the portable display to charge some devices via the full function USB Type-C port. Simply connect your compatible device to the portable display, and then power the display using the provided wall charger.
Device Compatibility: Mobile Phone, iPad Pro, Laptop with PD protocol
Related Input: PD 30W or above
Related Output: PD 15W or above

On Screen Display (OSD) Menu Introduction

Instructions:

1. Open the OSD Menu by pressing the Multi-Function Key
2. Highlight the selected feature by scrolling up or down with the Multi-Function Key
3. Open the selected menu section by pressing the Multi-Function Key
4. Press and hold the Power Button to back out

FAQ

Q1: Does this display require any additional software or drivers?
A: The NexiGo portable display does not require any additional software or drivers to use. Simply plug your device into the display using the USB Type-C or HDMI cable, ensure that the display is properly powered (HDMI connections do not supply power, and USB OTG connection do not either), and you are good to go!

Q2: Can I use this display with the Playstation, Switch, or Xbox?
A: Yes, this display is compatible with any game console that has an HDMI or USB Type-C output. For all of these systems you will need to connect the monitor to the HDMI output port on the console, in addition to powering the display with one of the USB Type-C ports.

Q3: How long does the battery last?
A: The NexiGo portable display does not have a built-in battery for additional flexibility when traveling due to FAA regulations concerning batteries. The display instead pulls power directly either from a wall plug, or from the device it is attached to through the USB Type-C connection. When your device's battery is above 30%, the device will power the display. This duration can be extended through the use of a portable charger or an external power supply.

Q4: My laptop or cellphone has a Type-C port but is not on the list of supported devices, will this display still work for me?
A: The NexiGo portable display has a wide range of compatibility, so many devices are compatible we cannot name them all. As such, to figure out if your device would work with this display just determine if the item has a full featured USB Type-C port, or an HDMI port. If it has one of these ports it will work with the display, though it may require an external power source.

Q5: Why does the screen's image have color defects or seem off?
A: Please inspect any cables that are plugged in to make sure that the pins are straight and not bent. If they are bent, this may cause issues with the display.

Q6: My device is showing up in "Power supply mode" when connecting to the portable display. Is this normal?
A: The monitor only draws a small amount of power from its signal source. This is a normal result and nothing to worry about.

Q7: My screen image bounces or there's a wave pattern in the image, what should I do?
A: Please ensure that the signal cable is properly connected between the monitor and the output device. If there is no issue with the cable and the display is still having issues, please contact NexiGo support for assistance.

Contact Information

Manufacturer: Nexight INC
Address: 11075 SW 11th St. Beaverton, OR 97005, US
Website: www.nexigo.com
E-mail: cs@nexigo.com
Tel: +1 (458) 215-6088
Get in touch with FREE online services.
facebook.com/letsnexigo