Eagle Group EU2-1830C Assembly Instructions

instruction sheet
#A201426
insPect contents iMMeDiAteLY AnD FiLe cLAiM With DeLiVerinG cArrier For AnY DAMAGe
You Are resPonsiBLe For DAMAGe to Your unit iF returneD iMProPerLY PAcKeD.
#1
PLE SE RE D BEFORE SSEMBLY...
If your cart is plated in zinc or chrome, you
must assemble the "U"-handles PRIOR TO
cart assembly. ssemble as shown.
If your cart is stainless steel, skip this and
proceed to Step 1.
Step 1 - Mount top shelf.
• Slide shelf toward top of "U" handle legs.
• ttach split sleeves to top groove of "U" handle legs (see
figure 1 ). The wider part of the taper goes toward the bottom.
• Slide shelf down onto split sleeves
(see figure 1b).
split
sleeve
figure 1a
shelf
split sleeve
figure 1b
eagle Foodservice equipment, eagle Mhc, specFAB
Utility Cart
ASSEMBLY INSTRUCTIONS
SAVE YOUR BOX AND ALL PACKING MATERIALS.
#1
#2
#3
#4
"U" handle
legs
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S. . • www.eaglegrp.com
• Phone: 302/653-3000 • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: 302/653-2065
CAUTION
Parts List
#
#1 . . . 2 . . . . . "u" handle assembly
#2 . . . * . . . . . . wire shelves
#3 . . . 4 . . . . . donut bumpers
#4 . . . 4 . . . . . stem casters
#5
#5 . . . * . . . . . . split sleeves (pack of four)
#6 . . . 4 . . . . . double-threaded bolt **
#6
* Quantity will vary per order.
** For carts with zinc or chrome finish only.
Step 2 - Mount mid shelf.
• Slide shelf toward top of "U" handle legs.
• ttach split sleeves (see figure 1 ) to "U" handle
top shelf
• Slide shelf down onto split sleeves (see figure 2).
"U" handle
legs
, and retail Display are divisions of eagle Group. ©2014 by the eagle Group
®
qty description
double-
threaded
bolt
Before continuing, please note:
Step 2 pertains to carts with three shelves.
If your cart has only two shelves, skip Step 2
and proceed to Step 3.
legs at desired height.
corner
collar
post
split
figure 2
sleeve
(continued on back page)
eG9830
.
revised 04/14