Wizard-tk ON-FRTP8 User Manual

Important Safety Instructions
•
Read and keep these instructions.
•
Ensure that your installation area can safely support 3 times the weight of the device.
•
Do not install the device in extreme temperature conditions. Only use the device where temperatures
are within the limits shown in the device specifications. Be especially careful to provide ventilation when
operating under high temperatures.
•
Do not install indoor rated devices where they will be exposed to rain or moisture.
•
To prevent damage to the image, do not aim the device toward an extreme light source.
•
Do not touch the device lens, dome or bezel (front glass plate).
•
Do not drop the device or subject it to physical shock.
•
Do not use strong or abrasive cleaners, clean only with a soft cloth and mild detergent or alcohol.
•
Do not open the device or attempt to service it yourself. Refer all service issues to your dealer.
Product Features
This 3-in-1 Face Recognition and Temperature Measurement is a smart access control terminal. It combined
with IR Human Recognition and High Precision Temperature Measurement. It used for Instant No-contact
human body Temperature detection, Registration, Recording and Other functions, widely used in access gates,
office areas, office buildings, hotels, schools, hospitals, airports, shopping malls, communities and other public
places etc.
Overview
Installation
Before you start:
1. Please make sure that the device is in good condition and all of the assembly parts are included.
2. Make sure that all related equipment is powered-off during the installation.
3. Check that the device specification agrees with the installation environment.
4. To avoid damage, ensure the power supply voltage matches your device requirements.
5. Please make sure the installation surface is strong enough to withstand three times the weight of the
device and the mounting.
6. If the installation surface is concrete, you need to insert expansion screws before you install the device.
If the installation surface is wood, you can use self-tapping screws to secure the device.
7. If the product does not function properly, please contact your dealer or the nearest service center. Do
not disassemble the device for repair or maintenance by yourself.
Model : ON-FRTP8 User Manual