Corsair RELAXED TC100 Manual

PACKAGE CONTENTS

ASSEMBLY

1. INSTALL CASTERS
   
2. INSTALL PISTON AND COVER
   NOTE: If there is a protective cover on the tip of the gas lift, remove it.
   
3. ASSEMBLE CHAIR SEAT MECHANISM
   
   NOTE: On some models, the screws are pre-installed in the seat and will need to be removed and re-used. In others, the screws are in the hardware bag. Use four screws to secure seat base.
4. INSTALL ARM RESTS
   
   NOTE: If your chair seat had arm rests pre-installed, you can skip this step.
   NOTE: On some models, the screws are pre-installed in the seat and will need to be removed and re-used. In others, the screws are in the hardware pack.
   Arm rests may vary in number of screws required to secure to base.
5. SECURE SEAT BACK TO SEAT CUSHION
   
   NOTE: On some models, the screws are pre-installed in the seat and will need to be removed and re-used. In others, the screws are in the hardware pack. Use two screws per side.
6. PLACE CHAIR ASSEMBLY ON BASE
   
7. PLACE COVERS ON HINGES
   Cover hinge with plastic cover, secure with small screw into chair. Use the plug to cover the screw hole.
   
   NOTE: Some models may also require a hinge cover to be installed with a screw, while others have the cover pre-installed.
   
   NOTE: Cover, hinge, and plug designs may vary between models.
8. ADD NECK AND LUMBAR PILLOWS (OPTIONAL)
   

USER MANUAL

Improper use of this chair may cause damage to this chair or result in personal injury. Please use this chair in a non-abusive manner.

1. Tilt lock/height adjustment lever
   Push the lever towards the center of the chair to engage the tilt lock. Pull it away from the chair to disengage the tilt lock.
   To lower the height of the chair, pull the lever upwards while weight is applied on the chair. To increase the height, pull the lever up while the chair is empty.
   
2. Recline lever
   Pull this lever up to recline the seat back forward or backward.
   
   
   Do not apply pressure to the seat back prior to pulling the recline lever. The sudden shift of weight may cause the chair to become unstable which may cause damage to the chair and/or result in personal injury.
3. 4D arm rest
   
   NOTE: Not all chairs feature four-way arm rest adjustability, some may feature two or three-way modes instead.
   1. Forward/backward slide button
   2. In/out button
   3. Height adjustment tab
   4. Swivel
4. Tilt tension knob
   Rotate this knob to increase (+) or decrease (-) the tilt tension.
   
   TIP: If the chair tilts easily, you may want to increase the tension. Alternatively, decrease the tension if you find it too hard to lean back while sitting on the chair.

Web: corsair.com
Phone: (888) 222-4346
Warranty: corsair.com/support/warranty
Support: support.corsair.com
Blog: corsair.com/blog
Forum: forum.corsair.com
YouTube: youtube.com/corsairhowto