Advertisement
Quick Links
Advertisement
Summary of Contents for Eurofyre ProFyre A4
- Page 1 ProFyre A4 REPEATER Setup Manual INSTALLATION MANUAL...
- Page 2 PROFYRE A4 REPEATER INSTALLATION MANUAL Software Versions: PANEL-1.44 Contents Page No. Mounting the Repeater Panel................... 2 Programming........................3 Accessing the repeater......................3 Network Setup........................3 Language..........................4 Password..........................4 Check Version........................4 FW Upgrade........................4 Exit Setup...........................4...
- Page 3 PROFYRE A4 REPEATER INSTALLATION MANUAL Software Versions: PANEL-1.44 1.0 FIXING THE BACK BOX TO THE WALL Figure 2: Plan view inside the enclosure without PCBs. Side view for surface installation. (Dimensions: mm) Fix the enclosure to the wall using the three mounting holes provided (2 circular holes near the bottom of the rear face and one “keyhole”...
- Page 4 PROFYRE A4 REPEATER INSTALLATION MANUAL Software Versions: PANEL-1.44 Repeater RS485 Connections There are two ways in which to wire the repeater panel to the net work. • Wire as a loop or ring as shown in the diagram • Wire as a bus (from A to B and so on)
- Page 5 PROFYRE A4 REPEATER INSTALLATION MANUAL Software Versions: PANEL-1.44 2.0 PROGRAMMING THE REPEATER 2.1 Accessing the repeater. • Password Enter the password (default code 2222) • [x] [x] [x] [x] Press key. Enter the code as follows • Password Press NEXT> twice to enter the number 2 followed by the key.
- Page 6 PROFYRE A4 REPEATER INSTALLATION MANUAL Software Versions: PANEL-1.44 2.3 Language The repeater has two language options. Language Selection • ENGLISH Language English • SPANISH Press to enter the menu and then by pressing the <PREV or NEXT> key will scroll between the two options.
Need help?
Do you have a question about the ProFyre A4 and is the answer not in the manual?
Questions and answers