Technical Specifications - Vivanco PCI GIGABIT ETHERNET CARD - PROGRAMMING User Manual

23406
GB
1. Introduction
Thank you for purchasing the Vivanco 10/100/1000 Gigabit Ethernet Adapter. This Gigabit Ethernet
Adapter allows to connect your PC to a wired 10, 100 or 1000 Mbps network.
This card is equiped with 2 LEDs indicating the Link/Activity status in 10Mbps, 100Mbps or 1000Mbps
environment.
•
Link/Activity (Link/ACT):
This indicator lights green when the RJ-45 port is connected to a Ethernet network, if the indicator
blinking green will be transmissing/received data to/from the Ethernet network.
•
Link Speed Indicator (SPEED):
The indicator lights green when the port is connected to 1000Mbps Gigabit Ethernet Network and
the indicator lights amber when the port is connected to 100Mbps Fast Ethernet Network.
Otherwise, this indicator remains off when the port is connected to a 10Mbps Ethernet Network.

Technical Specifications

Standards
Protocol
Data Transfer Rate
Network Cables
Temperature
Humidity
EMI:
PCI Gigabit Ethernet Card
General
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
ANSI/IEEE NWay Auto-Negotiation
32-bit CardBus PC Card
CSMA/CD
Ethernet: 10Mbps (half-duplex)
20Mbps(full-duplex)
Fast Ethernet: 100Mbps (half-duplex)
200Mbps (full-duplex)
Gigabit Ethernet: 2000Mbps (full-duplex)
10BASE-T: 2-pair UTP Cat. 3,4,5
EIA/TIA- 568 100-ohm STP
100BASE-TX: 2-pair UTP Cat. 5
EIA/TIA- 568 100-ohm STP
1000BASE-T: 4-pair UTP Cat. 5e
EIA/TIA- 568 100-ohm STP
Physical and Environmental
Operating: 0° ~ 50° C, Storage: -10° ~ 70° C
Operating: 10% ~ 90%, Storage: 5% ~ 90%
FCC Class B, CE Mark B, VCCI-B
2