Download Print this page

Advertisement

Quick Links

Ida
Operating and Cleaning Instructions
Version 1.0 EN

Advertisement

loading
Need help?

Need help?

Do you have a question about the Ida and is the answer not in the manual?

Questions and answers

Summary of Contents for Naturkind Ida

  • Page 1 Operating and Cleaning Instructions Version 1.0 EN...
  • Page 2 This is our aim, and we pursue it with love, great sensitivity and a sense of responsibility. It is important to us to equip every single Naturkind stroller with our philosophy.
  • Page 3 Contents Delivery Contents ............................34 2. Warnings and Compatibility ........................35 Warnings ............................35 Compatibility of Naturkind products with Naturkind frames ..........38 3. Operation ............................... 39 Your Naturkind stroller ........................39 Setting up the frame ........................41 Activating and releasing the parking brake ................41 Adjusting the height of the steering arm .................
  • Page 4 1 pc. wooden board (footrest) 1 pc. roof with roof mount 1 pc. instructions soft carrycot 1 pc. safety bar cover Optional: hard carrycot Ida 2 pcs. shoulder pad 1 pc. hard carrycot including roof 1 pc. instructions Ida 1 pc.
  • Page 5 with hard carrycot with soft carrycot sports stroller 2. Warnings and Compatibility 2.1 Warnings Subject to technical modifications. Please read these instructions carefully before If you fail to observe this, we cannot accept you use your stroller and follow the instructi- any liability for accidents! ons to assure maximum security for your child, so you can enjoy your stroller for a long time.
  • Page 6 For safety reasons, only use original accessories and spare parts provided The seating unit or the hard carrycot by Naturkind. or the soft carrycot cannot be used in the car. Keep the stroller away from fire. Before each use, check whether the...
  • Page 7 Please also note: The maximum load of the shopping basket may not exceed 5 kg. ° Keep the rain protection away from children. ° Important information for machine washing: After only 2 to 3 seconds, virgin sheep’s wool For more information on care instructions for begins to contract and cannot return to its the fabric parts, see part 4 on page 53.
  • Page 8 Seating unit Varius Pro Hard carrycot Ida Hard carrycot Ida braided Hard carrycot Lux Hard carrycot Varius Pro Hard carrycot Max XL hard carrycot Soft carrycot WARNING! Never use combinations of Naturkind products and Naturkind frames that are incompatible with one another!
  • Page 9 3. Operation 3. Operation 3.1 Your Naturkind stroller 3.1 Your Naturkind stroller...
  • Page 10 The controls that are necessary to operate the most frequently used functions are executed in gray color on the frame and the seating unit. Among other things, your stroller is equipped with the following functions. You can find a detailed description of these and other functions on pages 39 to 52.
  • Page 11 3.2 Setting up the frame Lift the steering arm (a) upward until the frame has set itself up and both locks have audibly engaged. WARNING! Before using the stroller, make sure that all locks are engaged! Please pay attention to contact points when setting up the frame.
  • Page 12 3.4 Adjusting the height of the steering arm Push both buttons on the exterior of the steering arm (1) to adjust the height of the steering arm and move it to the desired position. WARNING! When you are adjusting the height of the steering arm, please beware of resulting clamping points.
  • Page 13 3.6 Adjusting the inclination of the footrest Push the buttons for adjusting the footrest (3) on both sides of the seating unit, keep them pressed and ensure that the footrest engages in the desired inclination. WARNING! Whenever you use the soft carrycot, the footrest must always be in a level position, as a support.
  • Page 14 3.7 Putting on, adjusting and opening the safety belt 1. Activate the parking brake (see section 3.3 on page 41) before you place your child in the seating unit. 2. Use the sliding buckles (9) to shorten or lengthen the belt, if required. 3.
  • Page 15 Fixate the shoulder straps in your desired height in the backrest: 1. First, hook the plastic parts (12) in the slots in the seat cover according to your desired fixation height. Make sure that both shoulder straps are fixated in the backrest at the same height.
  • Page 16 3.10 Attaching the seating unit or hard carrycot to the frame 1. Activate the parking brake (see section 3.3 on page 41). 2. Insert the pins that are located on both sides of the seating unit and the hard carrycot in the provided receivers (16) in the frame.
  • Page 17 3.11 Securing soft carrycot in your stroller If the fastening strap is not fixed on the frame, you must fixate it. For this purpose, proceed as follows: 1. The fastening belt (17) consists of two belt pieces, whereby a buckle is attached to instructions: one belt piece and a center piece is attached to the other.
  • Page 18 As soon as the fastening belt is fixed to the frame, use it to secure the soft carrycot: 1. Activate the parking brake (see section 3.3 on page 41). 2. Place both the footrest (c) and the back part (b) of the seating unit in a flat position (see section 3.5 on page 42 and section 3.6 on page 43).
  • Page 19 3.12 Removing the seating unit or hard carrycot from the frame 1. Activate the parking brake (see section 3.3 on page 41). 2. Press the light gray push button (20) on one side of the stroller. 3. Repeat this on the other side of the stroller. 4.
  • Page 20 3.13 Folding the frame 1. Remove the seating unit or the hard carrycot from the frame (see section 3.12 on instructions page 49) and empty the shopping basket (d). 2. Press down slightly at the frame, and simulta- neously pull both release brackets upwards. Ensure that the folding levers remain in this position and push the steering arm forward until it forms an arch before arriving at the front of...
  • Page 21 3.15 Removing and mounting the wheels WARNING! After mounting is completed, make sure that the wheels have been firmly mounted. In order for the wheel to run smoothly, it needs to feature axle clearance You have the option to remove the wheels in a way that the wheel axles remain mounted in the rear axle of the stroller.
  • Page 22 3.16 Removing the roof To remove the roof, please proceed as follows: 1. Open the zipper at the end of the roof. 2. Push the gray push button (23) at the plug-in part of the roof. Pull the plug-in part of the roof toward the footrest to release the roof there.
  • Page 23 4. Care 4.1 Fabric parts All cotton fabrics come from controlled organic instructions for the fabrics. Otherwise, the cultivation and are dyed on a natural basis. virgin sheep’s wool that is used as filling ma- This natural fiber is more sensitive than syn- terial may become felted, exit the material or thetic fiber and is therefore quicker to bleach.
  • Page 24 4.2 Cork handles Clean dirty cork handles by wiping them with lukewarm soapy water and a soft cloth. Do not use any abrasive cleaning agents or cleaning rags. 4.3 Wheels The wheels are not balanced. Therefore, a production-related imbalance cannot be excluded and does not constitute a defect.
  • Page 25 5. Maintenance 5.1 General information Please perform the following maintenance Check all screw connections. Tighten the ° work at least once a month: screws, if necessary. Clean and grease the axle. Oil all movable parts (springs, hinges). ° ° Check the wheel sockets and the fixed Oil all brake parts (brake pedal, brake bolt).
  • Page 26 5.2 Wheel alignment To set the track, proceed as follows: 1. Lock the front wheels 2. Check whether front and rear wheel are in alignment. 3. If not, open both nuts at the track rod and remove the screw. 4. Open the lock nut at the track rod by two or three revolutions.
  • Page 27 ° smaller, disregarded damages or defects, consequences of improper or independent ° repairs or changes of the product without prior approval of Naturkind.
  • Page 28 6.2 Examples None of the following examples are guarantee day cannot be accepted and are regarded claims: as a result of wear. Color differences cannot always be The frame and the tubes are protected ° ° avoided during production and do not against rust by high-quality paint.
  • Page 29 Europe. Our suppliers come exclusively from Austria, Germany and neighbouring European countries. Naturkind Kinderwagen works according to the highest ecological standards and is the only pram manufacturer to be GOTS-certified.