BALAY 3VT541BD - annexe 1 Instructions

Brief and handy:
en
everything your dishwasher
needs ...
Before using for the first
time, read the operating
instructions!
Filling the salt dispenser
Adding rinse aid
Adding detergent
Turn on tap
Water flows in ...
Select programme
Switch on the appliance
Press main switch, running time of the selected
programme is indicated.
Switch off the appliance
When the display is on 0 (end of programme), press
the main switch.
Adjusting the water softening system*
Ask your water supply
company what the water
hardness is and enter ...
* only before the first wash
or if the water hardness
has been changed
Dissolves limescale (not required for set value 0!)
Everything is sparkling clean ...
Very dirty dishes, a lot of detergent ...
Quick, economical or intensive ...
Overview of programmes
This overview indicates the max. possible number of
programmes. The programmes which correspond to your
appliance can be found on your appliance fascia.
The programme data are values measured in the
laboratory in compliance with Standard EN 50242.
Deviations is practice are possible.
Additional programmes **
Here we go ...
Soaking
... of utensils in the
Everything o.k. ... bottom basket,
programme starts
automatically, 5 g of
extra detergent on
the open door!
Read off the correct setting for your water hardness ...
Only before using
Unscrew
the dishwasher
the lid.
for the first time
pour approx. 1 l /
2 pt water into the
salt opening.
Press mark 1,
lift up lid 2.
Warning,
If required, open
the lid (press the
combination
pin).
products are not
suitable for all
programmes,
follow manufac-
turer's instructions.
Duration in minutes
Power consumption in kWh
Water consumption in litres
With Aqua sensor
Flexibility ...
Reduce/save time
... reduces washing time
reduces drying time
** some models
Quickly sorted ...
How to adjust the water softening system
– Rotate the programme button from the 12 o'clock position by one notch
to the left.
– Switch on the main switch and hold down for at least 3 seconds. The digital
display indicates the current set hardness value (factory setting 4).
– Change the set value by rotating the programme selector (0–7).
– Switch off the main switch. The set value is saved.
Pour in max.
1.5 kg / 3 lb 5 oz
salt (never deter-
gent!)
Refill whenever level indicator is light!
Pour in
rinse aid.
Pour in
detergent.
Intensive Normal Eco
70 65 50
98 105 140
2 1,75 1,05
23 23 16
18 15 –
Time selection
Half load
...switches on as soon as
... for a few items, saves
you press the time
water, energy and time
h.
selection button:
Alters the programme
start in hourly steps
Screw on the
lid. Switch on
dishwasher
immediately.
Close the
lid. CLICK!
Push the lid
shut, press.
PLOP!
Gentle
Quick Prerinse
40 45
72 35 15
1 0,90 0,10
19 13 5
12 –