Advertisement
Quick Links
Instruction Manual
Model:
PSRX2-M3-EU
CORDLESS RECIPROCATING
SAW
• SAFETY
• ASSEMBLY
• OPERATION
CAUTION: Before using this tool, please read this manual completely,
• MAINTENANCE
and follow all operating safety measures.
Senix Australia Pty Ltd. 32/3 Westside Avenue, #Port Melbourne, Victoria, 3207
For customer support, please call 1300 461 825 or email us at info@senixtool.com
SENIX.COM.AU
English
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Senix X2 PSRX2-M3-EU
- Page 1 CAUTION: Before using this tool, please read this manual completely, • MAINTENANCE and follow all operating safety measures. Senix Australia Pty Ltd. 32/3 Westside Avenue, #Port Melbourne, Victoria, 3207 For customer support, please call 1300 461 825 or email us at info@senixtool.com SENIX.COM.AU...
- Page 2 Do not dispose of battery packs in rivers or immerse in water. Do not dispose of battery packs in fire. They will explode and cause injury. Waste electrical products should not be disposed of with household waste. Please recycle where EN - 2 SENIX.COM.AU...
- Page 3 Keep cord away from become complacent and ignore tool heat, oil, sharp edges or moving parts. safety principles. A careless action can Damaged or entangled cords increase the 3 - EN SENIX.COM.AU...
- Page 4 Use gloves to provide extra cushion, RECIPROCATING SAWS take frequent rest periods, and limit daily time of use. Hold the power tool by insulated Avoid prolonged contact with dust from gripping surfaces, when performing an EN - 4 SENIX.COM.AU...
- Page 5 • Switch off the product and remove the battery pack if there are malfunctions. Have the product checked by a qualified professional and repaired, if necessary, before you operate it again. SAVE THESE INSTRUCTIONS 5 - EN SENIX.COM.AU...
- Page 6 KNOW YOUR UNIT APPLICATIONS Model: PSRX2-M3-EU As a reciprocating saw: Cutting wood, metal, and plastic materials. Pivoting Shoe Blade Clamp Blade Clamp Release Lever Secondary Handle Variable Speed Trigger Trigger Lock Main Handle Shoe Release Button EN - 6 SENIX.COM.AU...
- Page 7 Using an incomplete or damaged product represents a hazard to people and property. Ensure that you have all the accessories and tools needed for assembly and operation. This also includes suitable personal protective equipment. 7 - EN SENIX.COM.AU...
- Page 8 This is especially critical for plunge cuts. Using a glove, push blade clamp all the way back. The workpiece must be thinner than PVC pipe the minimum blade extension. Fig. 4 PVC pipe Fig. 2 Fig. 5 BATTERY PACK EN - 8 SENIX.COM.AU...
- Page 9 LED WORKLIGHT The LED worklight is immediately activated when the tool is switched on. The worklight is for lighting the immediate work surface and is not intended to be used as a flashlight. 9 - EN SENIX.COM.AU...
- Page 10 Do not force. Use only enough pressure to Plunge cut into plywood, sheetrock, and thin keep the saw cutting. Let the blade and saw do board panels. Do not attempt to plunge cut the work. Use of excessive pressure will cause EN - 10 SENIX.COM.AU...
- Page 11 • Any other condition that may affect its safe operation. Cleaning Clean dust and debris from air vents. Keep the handle clean, dry, and free of oil or grease. Make sure the clamp is free of chips and 11 - EN SENIX.COM.AU...
- Page 12 Allow tool to work at its own Forcing tool to work too fast rate Keep blades sharp. Replace as Overheating Blade dull or damaged needed Blow dust out of motor using Blocked motor housing vents compressed air EN - 12 SENIX.COM.AU...
Need help?
Do you have a question about the X2 PSRX2-M3-EU and is the answer not in the manual?
Questions and answers