Download Print this page

Kentix DoorLock-WA4-V2 Manual

Advertisement

Quick Links

Wall reader (bus) DoorLock-WA4-V2 – MANUAL | 1
ORDER-CODES:
,
KXC-WA4-IP1-V2
KXC-WA4-IP2-V2
Datasheet KXC-WA4-IPx-V2
Overview
Kentix IP wall readers enable contactless control of doors with a MIFARE® DESFire® RFID chip.
The outdoor wall reader is suitable for installation in outdoor areas. The electronics of the reader are
housed in a dust-tight and jet-proof enclosure and comply with protection class IP66. The setup
always consists of the actual wall reader and the connected Kentix AccessManager. The wall reader
is connected to the AccessManager via a 4-wire connection. The AccessManager itself connects
directly to a Power over Ethernet (PoE) capable network switch. To control electric strikes/motor
locks, the SmartRelay offers two relay outputs and, depending on the power class of the strikes, an
integrated PoE splitter with 24VDC output.
For the operation of the wall readers (version: V2), a Kentix AccessManager for cable readers (KXP-2-
© Kentix GmbH. This file was automatically generated on 2025-01-25 08:04:02. Please visit
docs.kentix.com
for the
latest documentation.

Advertisement

loading
Need help?

Need help?

Do you have a question about the DoorLock-WA4-V2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Kentix DoorLock-WA4-V2

  • Page 1 SmartRelay offers two relay outputs and, depending on the power class of the strikes, an integrated PoE splitter with 24VDC output. For the operation of the wall readers (version: V2), a Kentix AccessManager for cable readers (KXP-2- © Kentix GmbH. This file was automatically generated on 2025-01-25 08:04:02. Please visit docs.kentix.com...
  • Page 2 Kentix accepts no liability for damage to the equipment or components resulting from incorrect installation. No liability is accepted for incorrectly programmed units. Kentix shall not be liable in the event of malfunctions, damage to property or other damage. Use of the products, transport and storage Protect the device during transport, storage and operation from Protect moisture, dirt and damage.
  • Page 3 Wall reader (bus) DoorLock-WA4-V2 – MANUAL | 3 Connections © Kentix GmbH. This file was automatically generated on 2025-01-25 08:04:02. Please visit docs.kentix.com for the latest documentation.
  • Page 4 Terminal # Reader Reader AccessManager – – – – RS-485 A 6 (BUS A) RS-485 B 5 (BUS B) – – – – © Kentix GmbH. This file was automatically generated on 2025-01-25 08:04:02. Please visit docs.kentix.com for the latest documentation.
  • Page 5 For the operation of the wall readers with version 2 (V2), the connected AccessManagers requires at least the KentixONE version 8.2.0 Connection example One or two wall readers with door contacts and external door openers © Kentix GmbH. This file was automatically generated on 2025-01-25 08:04:02. Please visit docs.kentix.com for the latest documentation.
  • Page 6 User and access management The administration of users and access rights is done on the main device of the installation with KentixOne. © Kentix GmbH. This file was automatically generated on 2025-01-25 08:04:02. Please visit docs.kentix.com for the latest documentation.
  • Page 7 LED flashes red Zone is armed 3 long tones, simultaneously LED flashes 3x red Arming not possible long tone, LED flashes red Table signaling © Kentix GmbH. This file was automatically generated on 2025-01-25 08:04:02. Please visit docs.kentix.com for the latest documentation.

This manual is also suitable for:

Kxc-wa4-ip1-v2Kxc-wa4-ip2-v2