General Problems - Dell W2606C Owner's Manual

General Problems

Problem
Poor picture quality while watching TV
and using a device such as a DVD
player or a VCR
Possible Solution
• Check the aspect ratio settings in the TV Menu. Press the Menu
button on the remote control and select Size. "Using the TV
Menu" on page 23. For more information on using the TV
Menu, see "Using the TV Menu" on page 23.
• Reconnect the device using the same type of connector. For
example, if you are using the composite connector on the
bottom, try connecting the device to the composite connector
on the side of the LCD TV display. See "About Your LCD TV
Display" on page 5 for the location of the connectors.
After you connect the device, change the input source in the TV
Menu. See "Input Select Menu" on page 24 for more
information.
• Connect the device using a different connector. For example, if
you are experiencing the problem using a composite connector,
try using the component connector.
NOTE:
To connect to a different connector, you need the
appropriate cables for that connector. See your device
documentation for a list of supported connections.
After you connect the device, change the input source in the TV
Menu. See "Input Select Menu" on page 24 for more
information.
• Reset the original factory defaults. Press Menu on the remote
control, select Setup, and then select Factory Reset.
• Adjust the color temperature. Press Menu on the remote
control, select Picture, and then select Color Temperature.
NOTE:
Some set top boxes offer aspect ratio. See your device
documentation for more information.
Troubleshooting Your LCD TV Display
31