Vox Ignis ViAC-1ZC Product Manual

AssistCall 1-Zone Controller
Assist Call ViAC-1ZC - 1 Zone Controller
Installation and Operation Sheet
Revision
Description of Change
Number
0 Initial Draft
1 Initial Release Version
2 Updated layout
1 Product Overview
The Assist Call emergency assistance alarm is a 2 wire system consisting of a 1 Zone controller with integral power
supply which should be located in a permanently staffed area, ceiling pull cord located near to the WC, cancel plate
also located near to the WC and over door indicator plate located above the door outside of the WC.
Additional assist call devices can be connected to the circuit of either one additional cancel plate or overdoor indicator
and up to 5 additional ceiling pull cords. Assist call devices can be wired in any order so wiring runs can be kept to a
minimum.
The Assist Call system wired from a 1 zone controller features BS8300 "acknowledge" function, this requires that
"visual and audible feedback should be provided to indicate that, when the alarm has been operated, the emergency
assistance call has been acknowledged and is being actioned.
reassure those in distress."
All Assist Call devices utilise blue halo indication so that they will not be confused with fire alarm devices.
Please note the ViAC-1ZC 1 zone controller is only compatible with the Vox Ignis "Assist Call" range of
emergency assistance alarms.
Document DViAC1ZC1001-02
Version 2- January 2025
Date of
Change
12/01/21
26/11/24
Note an indication that assistance is on its way will
Product Manual
Author of
Change
JK
JK
JS
Page 1 of 4