Related Manuals for Boss Industrial WD27T
Summary of Contents for Boss Industrial WD27T
- Page 2 If you have any problems or questions concerning the machine, phone an authorized service dealer or contact us directly. Boss Industrial’s customer support phone number, website and mailing address can be found on this page. We want to ensure your complete satisfaction at all times.
- Page 3 Table of Contents Page(s) Section I: Know Your Log Splitter...........................1-5 Log Splitter Overview.............................1 Safety Decals..............................2-3 Important Tips..............................4 Operator Zone..............................4 Fire Prevention...............................5 Hydraulic Safety ............................5 Section II: Pre-Operation Instructions........................6-14 Unpacking ..............................6-7 Assembling...............................7-13 Getting Prepared.............................13-14 Section III: Operation Instructions........................15-16 Section IV: Maintenance.............................17-20 Off Season Storage............................17 Transportation............................17-18 Maintenance &...
- Page 5 SAFETY DECALS Make sure that all safety warning decals are in good condition and readable. Always replace missing or defaced decals. Contact Boss Industrial, Inc. at 1-800-780-2677 for replacement decals. 1. Safety Warning / Operating Label (Part #: 410-188) 2. Pinch Point Warning Label (Part #: 410-233, 410-237) 3.
- Page 7 IMPORTANT TIPS 1. DO NOT discard packing materials until you have carefully inspected and satisfactorily operated the tool. 2. Read, understand, and follow all instructions on the machine and in this manual and the engine manual before attempting to assemble and operate. Keep the manuals in a safe place for future and regular reference and for ordering replacement parts.
- Page 8 FIRE PREVENTION Gasoline is a highly flammable liquid and the vapors are explosive. To avoid personal injury or property damage, use extreme care in handling gasoline. Always follow these precautions below, and refer to the Engine Manual for more safety instructions.
- Page 19 • Remove partially split wood from wedge. If the log is clipped or jammed on the wedge, release the control handle and shut off the engine immediately. Gently knock off the log with a hammer or mallet (not with your hands). WARNING! Never remove partially split wood from the wedge with your hands.
- Page 20 SECTION IV: MAINTENANCE OFF SEASON STORAGE If the log splitter will not be used for more than 30 days, prepare it for storage as follows: • Refer to the Engine Operator’s manual packed with your log splitter for information on the off-season storage of the engine.
- Page 24 TECHNICAL SPECIFICATIONS Model WD27T WD32T WD37T Engine B&S, CR950 B&S, XR1150 B&S, XR1450 Pump Two-Stage, 9 gpm Two-Stage, 13 gpm Two-Stage, 16 gpm Cylinder (Bore x Stroke) 4 in. x 22.6 in. 4.5 in. x 22.6 in. 5 in. x 22.6 in.
- Page 29 Boss Industrial to be defective in material or workmanship will be repaired or replaced without charge for parts and labor by Boss Industrial or its authorized service center. How to process a warranty claim? You must first call the BOSS INDUSTRIAL service hotline 1 800 780 2677 or send email to service@boss-industrial.com.
- Page 30 PACKING LIST Beam asembly x 1 Engine-Pump x 1 Tongue assembly x 1 Hardware kits box x 1, including: Reservoir tank assembly x 1 Hardware kit # 2-1, 5, 6-1, 6-2 Manual container x 1 Log tray & Log dislodger assembly x 2 Engine manual x 1 Wheel assembly x 2 Oil suction hose x 1...
- Page 31 Page 31...
Need help?
Do you have a question about the WD27T and is the answer not in the manual?
Questions and answers
Not developing enough down force to split a log greater than 10" or so