Page 2
We’re here to help you get the most from your washer dryer any guidance, a simple solution can often be found online at: www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271. Issue 1 10/05/2024...
Page 3
Functions Functions Using your washer-dryer First use of washer-dryer Guidelines of washing detergent Care and Maintenance Cleaning Maintenance actions Technical specifications or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
Page 6
This machine must be positioned on a firm level base. Do not splash water on the machine. It may cause electrical parts to fail and result in an electric shock. This washer-dryer is for indoor use only and must be protected from rain, moisture and extreme temperature variations.
Page 7
The machine with single inlet valve only can be connected to the cold water supply. Your machine is only for home use and is only designed for textiles suitable for machine washing. Be careful of burning when machine drains hot washing water. Never refill Machine shall not be installed in the water by hand during washing.
Page 8
Do not dry unwashed items in the appliance. Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes and wax removers should be washed in hot water with an extra amount of detergent before being dried in the appliance.
Page 12
Getting to know your washer-dryer You’ll be up and running in no time Ready? Let’s begin... Please read these instructions carefully. They contain important information which will help you get the best from your washer-dryer and ensure safe and correct installation and operation. If you require any further assistance, our technical experts are happy to help.
Page 13
1.Detergent Drawer 4.Control Panel 7.Transport bolt x 4 2.Door 5.Power lead 8.Water inlet 3.Filter 6.Drain hose or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271. Getting to know your washer-dryer...
Page 16
Installing your washer-dryer Bringing it all together Installation requirements • In addition to the instructions mentioned here, special regulations of the relevant water companies may apply. If in doubt, have the washer-dryer connected by a qualified technician. • is heavy - caution when washer-dryer lifting it.
Page 17
Installing your washer-dryer Water inlet hose connections Important: This washer-dryer MUST only be connected to a cold water supply. 1: Connect the water inlet hose, the angled connection attaches to the water inlet on the back of the washer-dryer. (Fig 7) Installing your washer-dryer...
Page 18
Installing your washer-dryer Electrical Installing your washer-dryer...
Page 28
If you still require further assistance, call one of our experts on 0345 257 7271. Using your washer-dryer...
Page 29
If you need to change a setting after the wash has started, press start/pause button and turn the selector to OFF position, then re-select the program, spin speed and optional functions, and then press the Start / Pause button. (Ensure the Child Lock is off, otherwise the original program will continue.)
Page 30
It is not necessary to remove the water manually. or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271. Using your washer-dryer...
Page 35
rating rating 20°C CARE+ 20°C CARE+ is able to clean lightly soiled cotton laundry, at a nominal temperature of 20°C, which complies with the regulation (EU) 2019/2023.
Need help?
Do you have a question about the WDSAA86W and is the answer not in the manual?
Questions and answers