Download Print this page
Davis & Waddell DES0599 Quick Start Manual

Davis & Waddell DES0599 Quick Start Manual

Digital kitchen scale

Advertisement

Quick Links

essentials
Electric Scale
DES0599
davisandwaddell.com.au
Thank you for choosing the Davis & Waddell
Electric Scale. To ensure proper operation
and to maintain the lifespan of your
appliance, please read these instructions
carefully before use.
Features and Parts
• 4mm tempered safety glass platform
• High definition red LED display
• Capacity: 10kg/ 1g
• Tare function
• Manual on / Manual off / Auto off
• Touch-panel switch
• Weight unit: kg / g / oz / lb; oz
• Auto zero resetting
• Over-load / Low power indication
Key Function
• Function keys located on the side of
the scale
• UNIT key : Press one time to change the
unit ( kg / g / oz / Ib; oz)
• TARE key : ON / OFF / TARE function
Power Supply
• Battery: 4x1.5V AAA batteries (not included)
• When the LED display indicates " Lo ",
open the battery door and replace the new
batteries with correct polarity.
Digital Kitchen Scale
Operation
Step 1 : Place the scale on the hard and
flat surface
Step 2 : Touch the right side of scale or press
the key "TARE", LED display will show zero
after "HELLO" appeared on the display.
Step 3: Put food on the scale, the LED
display will show the weight of food.
Tare Function
Step 1 :Place a container on the glass, LED
display wil show the weight of container.
Step 2 : Press the "TARE" key to clear the
weight of the container (reset to "0"), put
the food into the container, the LED display
will show the food weight only. To repeat
press "TARE" key to weigh different foods.
Step 3 :If food is removed from the container,
the screen will display a negative value. Press
the "TARE" key again, after 2 seconds the
display will show the weight status.
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the DES0599 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Davis & Waddell DES0599

  • Page 1 “TARE”, LED display will show zero after “HELLO” appeared on the display. essentials Electric Scale DES0599 davisandwaddell.com.au Thank you for choosing the Davis & Waddell Step 3: Put food on the scale, the LED Electric Scale. To ensure proper operation and to maintain the lifespan of your display will show the weight of food.
  • Page 2 Hold Function What To Do: Step 1 : Press the “UNIT” key for 2 seconds If a fault/defect is identified, cease using to switch on the “HOLD” function, the LED the product immediately. To make a claim display will show “H-ON” on this guarantee, take the product, proof of purchase, and full details of the alleged Step 2 : Put the food on the scale, the LED...