Morris MR4124012 Easy Assembly And Operation Instructions

EASY ASSEMBLY AND OPERATION INSTRUCTIONS
MR4124012 Rocking Santa
Please follow the step by step guide and enjoy your Rocking Santa!
CARE AND STORAGE INSTRUCTIONS
For best performance operate your item indoors. When not in use, store this product in its original
packing. Keep away from heat and moisture.
PARTS LIST
A. Base/Frame x 1
B. Pants x 1
C. Right Leg x 1
D. Left Leg x 1
E. Shoulder Frame x 1
F. Stomach Ring x 1
G. Jacket x 1
H. Right Arm x 1
I. Left Arm x 1
J. Belt x 1
K. Head x 1
L. Hat x 1
M. Step Pad x 1
N.
Universal Adapter (Included)
Input: 100 - 240VAC 50/60Hz
Output: 5.9V 3.0A
N
BEFORE ASSEMBLING, REMOVE ALL THE ABOVE PARTS FROM BOX. IF ANY PART IS MISSING, PLEASE CONTACT CUSTOMER SERVICE AT
SUPPORT@MORRISCOSTUMES.COM, OR BY PHONE 704-332-3304. IN YOUR EMAIL INQUIRY, PLEASE INCLUDE: YOUR ORDER NUMBER, WHO YOU BOUGHT IT FROM,
AND WHAT SPECIFICALLY IS WRONG. THANK YOU.
A
STEP 1
Note The longer end of the (A) Base/Frame goes towards the front. First place the (A) Base/Frame
in any chair as shown in Figure 1.
NOTE: Using a rocking chair will give the best effect. (Chair is not included)
NOTE: The speaker on the Function Control Box located on the (E) Torso Frame should be facing
front.
Now, plug the Adapter into the input receiving jack marked "DC 5.9V" on the Function Control Box
and route the Power Adapter down and out the bottom of the item.
A
x 1
G
ADAPTER ADAPTER
INPUT: 6V INPUT: 5.9V
3.0A 1000mA
TRY ME TRY ME
STEP
HERE
OPTIONAL: If you choose to use the Step
Activation Pad, plug the connector into the
input receiving jack marked "TRY ME" on
the Function Control Box and set the Step
pad in front of the character when ready to
display.
Note: Do not plug the Power Adapter into
power outlet until item assembly is
completed.
1
WARNING
This item is not a toy and should be used for decoration only. This item contains small parts that can be a
choking hazard. Keep all plastic and wire parts away from children. This product is intended for people
ages 14 and up.
Please read all instructions carefully before assembling. Save this instruction sheet for future reference.
B C
H I J
A
B
ON1 ON OFF / TRY ME ON2
OFF / TRY ME SENSOR
VOLUME VOLUME
- - + +
ADAPTER
B
C
C
B
2
STEP 2
Put the (B) Pants around the (A) Base/Frame as shown in Figure 1.
Slide the (C) Right Leg up through the right pants leg and slide the forked hook into the right slot
housing on the (A) Base/Frame as shown in Figures 2 & 3.
Slide the (D) Left Leg up through the left pants leg and slide the forked hook into the left slot
housing on the (A) Base/Frame as shown in Figures 4 & 5.
D E
K
1
2
3
F
L
M
B
D
4
D
B
5
1/2