Download Print this page

Starling Technologies Lost In Space Jupiter 2 Engine Sound Board Instruction Manual

Advertisement

Quick Links

Warning : Protect Board from electrostatic discharge. Ground yourself before handling.
Protect bottom of board from shorting against anything metal.
Thank you for purchasing the J2 3 sound sound board from
Starling Technologies™.
We are excited to release our sound board for the iconic flying saucer
from the show "Los In Space".
Mount inside your ship or base.
This soundboard incorporates all three single soundboard sounds into one and
adds a 3x AAA battery holder for longer run time.
Included in kit:
1x J2 sound board wired with 3x pushbuttons and 1x slide switch.
No soldering required.
How to use your engine board:
The sound board uses conventional pushbuttons and switches.
The switch turns power on/off and each button will play one the sounds
continuously until power is turned off or another button sound is activated.
You may drill holes in the back of the saucer to hide buttons and switch, or if
using a base, install the sound board, batteries and buttons in the base.
1
www.starling-tech.com
Instruction Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the Lost In Space Jupiter 2 Engine Sound Board and is the answer not in the manual?

Questions and answers

Summary of Contents for Starling Technologies Lost In Space Jupiter 2 Engine Sound Board

  • Page 1 Protect bottom of board from shorting against anything metal. Thank you for purchasing the J2 3 sound sound board from Starling Technologies™. We are excited to release our sound board for the iconic flying saucer from the show "Los In Space".
  • Page 2 NOTE: if sound partially plays, repeats or makes strange sounds, it is time to change your batteries. All photos contained in this document are property of Starling technologies. This document may not be copied, sold or transfered without permission. E/FX™ is a trade mark of Starling Technologies™...