Download Print this page
Odys FlexPump Manual
Odys FlexPump Manual

Odys FlexPump Manual

Battery-operated portable electric air compressor

Advertisement

Quick Links

Safety instructions
Read the operating instructions carefully before using the
device.
Do not drop the device or bump it hard.
Do not expose the device to extreme heat or cold. Do not
permanently expose the device to direct sunlight.
Protect the device from water and moisture. If water or
liquid enters the device, switch it off immediately, clean it
and allow it to dry.
Do not clean the device with chemicals to protect it from
corrosion. Only use a damp cloth.
To avoid electric shock, do not open the housing of the
device. There are no parts inside the device that can be
serviced by the consumer.
There is a risk of explosion if the battery is incorrectly
replaced. Replace only with a battery of the same type.
Note
Please do not charge the battery of the device
unattended and disconnect the power supply to the
device as soon as the battery is fully charged.
Note that the built-in rechargeable battery can only
be replaced by trained personnel.
Disposal
Do not dispose of a defective device (installed
battery) with household waste.
Return it to your specialist dealer or take it to a
collection point for old electrical equipment. This
ensures environmentally friendly disposal.
Intended use
The device is designed for filling with air of commercial car,
bicycle, motorcycle and e-scooter air tires, as well as balls in
moderate climate. This is the exclusive purpose of use of the
device.
Note
Please observe all the information in these
operating instructions, in particular the safety
instructions, before operating the device. Any other
use is considered improper and may result in
damage or injury. Furthermore, you will lose all
warranty claims. The manufacturer accepts no
liability for damage due to improper use.
These instructions may differ slightly from your
device. We reserve the right to make changes.

Advertisement

loading
Need help?

Need help?

Do you have a question about the FlexPump and is the answer not in the manual?

Questions and answers

Summary of Contents for Odys FlexPump

  • Page 1 Safety instructions Read the operating instructions carefully before using the device. ⚫ Do not drop the device or bump it hard. ⚫ Do not expose the device to extreme heat or cold. Do not permanently expose the device to direct sunlight. ⚫...
  • Page 2 Elements on the device Hose connection Flashlight USB-C port Unit display Pressure display Preset Battery level Unit / Lamp On/Off Reduce pressure Increase pressure Change mode Load pump Use a suitable 5V/2A USB power supply. Connect the power supply directly to a wall socket and use the enclosed connection cable to connect to the device.
  • Page 3 Use the device • Press the On/Off key for approx. 3 seconds to switch on the device. • Press the Mode key (M) to switch between the available presets. Change the set default value of the selected mode using the "+" and "-" keys. Mode Standard pressure Setting range...
  • Page 4 ATTENTION! Surface becomes hot! Customer service On our web pages you will find the latest information about this device, about other products of our company and about our company itself. Any firmware updates for this device are also provided on our website. If you have any questions or problems, refer to the FAQs on our website or contact our customer service.

This manual is also suitable for:

X910001