Related Manuals for Feider Machines FST7IN1-1
Summary of Contents for Feider Machines FST7IN1-1
- Page 1 ORIGINAL INSTRUCTIONS >EN 7-IN-1 WORKBENCH FST7IN1-1 USER GUIDE CAUTION: Read this manual before using this machine!
- Page 2 CONTENTS 1. INTENDED USE............................3 2. GENERAL SAFETY RULES........................ 3 3. PRODUCT DESCRIPTION........................4 4. TECHNICAL SPECIFICATIONS......................4 5. ASSEMBLY............................. 5 6. MAINTENANCE............................8 7. DECLARATION OF CONFORMITY....................8 8. WARRANTY............................9 9. PRODUCT FAILURE........................... 10 10. WARRANTY EXCLUSIONS......................11...
- Page 3 WARNING! Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. This machine is designed for certain applications only. The distributor cannot be responsible for issues arising from modification.
- Page 4 product on a stable, level surface. Failure to use properly or overload may result in serious personal injury. When using this product with power tools, please refer to the manufacturer’s instructions for guidance on usage. The product must be used only for its prescribed purpose. Any use other than those mentioned ...
- Page 5 5. ASSEMBLY Your 7-in-1 workbench comes fully assembled, just take it out of the packaging and follow the simple set up steps, then it’s ready to use. 3- Scaffold mode 1- Workbench mode 2- Sawhorse mode 4- Platform mode 5- Car creeper & dolly mode 6- Hand truck mode a/ Car Creeper &...
- Page 6 TIP: How to install the wheels. The 4 wheels are packed in the back of the workbench and need to be installed by the consumer after purchase. During installation, please be aware of the following: 1. Always use the gaskets which are provided in the carton. See the illustrations above. 2.
- Page 7 WARNING: DON’T USE SCAFFOLD PLATFORM MODE WITH LEGS FULLY EXTENDED. The inner legs are not designed to be used in this function. d/ Workbench & Sawhorse mode 1) Firstly, set up the legs by following the same steps as detailed within scaffold mode section. See A.
- Page 8 BUILDER SAS 32 rue Aristide Bergès - Z.I. du Casque - 31270 Cugnaux - France Declares that the machinery designated below: 7 IN 1WORKBENCH FST7IN1-1 Numèro de serie: 20240113681-20240114080 Is in conformity with the following Directives Machine Directive 2006/42/CE REACH Directive 1907/2006...
- Page 9 8. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identifed as defective by the designated distributor.
- Page 10 9 . PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank if your product has one. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine.
- Page 11 10. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...
- Page 12 BUILDER SAS 32 rue Aristide Bergès - Z.I. du Casque - 31270 Cugnaux - France MADE IN PRC 2023...
Need help?
Do you have a question about the FST7IN1-1 and is the answer not in the manual?
Questions and answers