Advertisement
Quick Links
Advertisement
Related Manuals for Tiger TCW-01
Summary of Contents for Tiger TCW-01
- Page 1 TCW-01 Checkweigher user's manual...
- Page 2 Page 1 of I. Introduction 1. Note 2. Safety 3. Warning 4. After- sales service II. Operation 1. Overview 2. Parameter setting 3. Installation 4. Run operation 5. Check the operation of the controller III. Maintenance 1. Maintenance...
- Page 3 Page 2 of Introduction Thank you for purchasing the automatic dynamic scale products produced by our company. Suggestion: If you want to make the most of this dynamic scale and give full play to all the functions of this set of equipment, please read this manual carefully before using it; and use it as much as possible to guide your work.
- Page 4 Page 3 of Encountering a fault, stop the equipment / system operation immediately and clear the fault as soon as possible. Not wear clothing that may be caught by moving parts, such as scarves, watches, etc. Long-haired people should have a hood to access the device; Wear work clothes and work caps;...
- Page 5 Page 4 of II. Operation 1. Overview TCW- 01 series checkweighers are specially designed for daily checkweighing, sorting, and batch product production lines of daily chemical, chemical, food and beverage, pharmaceutical and other production lines to check whether they are underweight, thereby ensuring product quality. The maximum detection weight of this device is 5000g (subject to the parameters actually set!).
- Page 6 Page 5 of 2) Common settings TCW- Set key content Set the lower limit and upper limit of qualified weight (generally Number keys ' 7 ' and ' 9 ' customers only need to set this parameter in use). Set the correction coefficient KX (the default is 1000 , do not change this Number key ' 8 ' value during use!).
- Page 7 Page 6 of 3. Equipment installation 1) The equipment contains precision instruments. Be careful when moving and moving. After the equipment is placed, adjust the level to ensure that the four supporting feet are under the same force, and then tighten the nuts. 2) Loosen the screws transportation limit, release the bottom of the rack .
- Page 8 Page 7 of time, and then enter the standby state; 2) work Put the start-stop switch in the 'Run' position, and the system enters the running state; When it is detected that the packaging bag enters the weighing platform, the result is obtained after delayed sampling;...
Need help?
Do you have a question about the TCW-01 and is the answer not in the manual?
Questions and answers