Subscribe to Our Youtube Channel
Related Manuals for Singer SEWHANDY MODEL 40K
Summary of Contents for Singer SEWHANDY MODEL 40K
- Page 1 Sewhandy model 40k INSTRUCTION MANUAL Table of Contents Back to Manual Index Download Manual in PDF Format Next Page...
- Page 2 Sewhandy model 40k Table of Contents Main Parts The Right Tension To Thread your Machine The Seam Guide To Sew a Fine Seam To Change Needle To End Stitching in Fabric To Oil your Machine Main Parts Previous Page Table of Contents Back to Manual Index Download Manual in PDF Format Next Page...
- Page 3 Sewhandy model 40k to Change Needle When your needle becomes blunt or bent, change it right away. Use a small screwdriver, if necessary, to loosen and tighten the screw. Insert the new needle with the flat side toward the left. Before you begin, be sure that the needle bar is up and the presser foot in down.
- Page 4 Sewhandy model 40k the Seam Guide This attachment will help you guide the fabric. You will use it to make straight seams and tucks and for placing stitching evenly around curved edges. Previous Page Table of Contents Back to Manual Index Download Manual in PDF Format Next Page...
- Page 5 Sewhandy model 40k the Right Tension A perfect seam is strong, flat and smooth. To make a perfect seam the tension on your thread must be just right. Tension is adjusted by turning the tension thumb nut. If your stitching looks like this, make it tighter by turning the tension thumb nut to the right.
- Page 6 Previous Page Table of Contents Back to Manual Index Download Manual in PDF Format Next Page...
- Page 7 Sewhandy model 40k To End Stitching in Fabric continued... Hold end of thread loop and cut Pass the scissors under the thread close to end of stitching. presser foot and pull thread loop to the left as far as it will go. Previous Page Table of Contents Back to Manual Index...
- Page 8 Sewhandy model 40k To End Stitching in Fabric Sometimes you may need to end Turn the hand wheel until the your stitching in the fabric. It is a needle is as high as it will go. good idea to finish tucks, pleats, Raise the presser foot.
- Page 9 Sewhandy model 40k To Sew a Fine Seam continued... An easy way to end a seam is to To start your next seam, hold the stitch right off the edge of the fabric edge against the front of the fabric. Make a little chain about presser foot and turn the hand one inch long.
- Page 10 Sewhandy model 40k to Sew a Fine Seam A plain seam is made by stitching two fabric edges together A seam must be started stitched and ended just so to be perfect This is how to do it. Place the fabric under the presser foot.
- Page 11 Sewhandy model 40k to Thread your Machine Before you begin, be sure that the presser foot is down and the needle is up. The presser foot is raised and lowered with the presser bar lifter. The needle is positioned by turning the hand wheel in the direction of the arrow.
- Page 12 Sewhandy model 40k to Oil your Machine Your sewing should be oiled occasionally, the same as mother's. Borrow her SINGER* Sewing Machine Oil and apply one drop to each place indicated. Previous Page Table of Contents Back to Manual Index...
Need help?
Do you have a question about the SEWHANDY MODEL 40K and is the answer not in the manual?
Questions and answers