Advertisement
Quick Links
Advertisement
Summary of Contents for makute CRS002-2B
- Page 1 已更新（22.04.14）...
- Page 2 Cordless Reciprocating Saw...
- Page 3 .com General Power Tool Safety Warnings cord for carry- WARNING ing, pulling or unplugging the power tool. Read all safety warnings and all in- Keep cord away from heat, oil, sharp edges structions. Failure to follow the warnings or moving parts.
- Page 4 .com unfamiliar with the power tool or ▲ Remove any adjusting key or wrench these instructions to operate the power before turning the power tool on. A tool. Power wrench or a key left attached to a rotating tools are dangerous in the hands of part of the power tool may result in personal in-jury.
- Page 5 .com...
- Page 6 .com ASSEMBLY (see gureA) BATTERY CHARGING The three green LEDs of the battery charge-control indicator 11 indicate the ▲ Use only the chargers listed in the charge condition of the battery 5. For technical data. Only these chargers are...
- Page 7 .com Check the tight seating of the saw blade. A Using other batteries can lead to injuries loose saw blade can fall out and lead to and pose a re hazard. injuries. Press the lock-o button 6 to the right to...
- Page 8 .com The LED indicator 11 ashes red, the power wood, plaster board or simi-lar! tool is blocked and switches o automati- Do not work metal materials with the cally. plunge cut-ting procedure! – Remove the power tool from the Use only short saw blades for plunge workpiece.
- Page 9 .com because of the material heating up. Recommendations for Optimal Handling of the Battery Protect the battery against moisture and water. Store the battery only within a tempera- ture range between –20 °C and 50 °C. As an example, do not leave the battery in the car in summer.
- Page 10 .com...
Need help?
Do you have a question about the CRS002-2B and is the answer not in the manual?
Questions and answers