Page 2
PLEASE READ ALL INSTRUCTIONS PRIOR TO INSTALLING IMPORTANT Installation Requirments For correct installation • The saber super fly must be mounted to a supportive platform-style roof rack or roof bar system • The tent is designed for attachment to o A full-length platform style rack...
Page 3
SABER SUPER FLY USER MANUAL CONTENTS Safety & Warnings Hardware & Accessories Fitting to roof rack Installation process Roof bars Ladder adjustment Opening & Set up Closing & Storage Warranty Mounting rail dimensions...
Page 4
SABER SUPER FLY USER MANUAL Safety & Warnings Improper installation or use of the Saber Super Fly roof top tent may result in serious injury or death. Follow these installation instructions carefully to ensure proper installation to vehicle and safe use of the roof top tent.
Page 5
SABER SUPER FLY USER MANUAL Hardware & Accessories The Saber Super Fly Hardshell roof top tent includes a mounting kit with everything required to mount the roof top tent to most roof racks. Note: Some platform style roof racks have platforms which are wider than the supplied mounting plate.
Page 6
Recommended and efficient installation of the Saber Super Fly The Saber Super Fly is designed to be attached directly to a full-length platform-style rack, flat rack or minimum 4 roof bars. For proper stability, the tent rails should be supported by planks or multiple cross members along the rack.
Page 7
SABER SUPER FLY USER MANUAL Installation Instructions. Ensure Proper Closure. Before starting the installation, ensure that the tent is fully closed and the center latches are securely fastened. Securing the Tent to the Roof Rack. 1. Prepare the components: a. Used the provided hardware: i.
Page 8
SABER SUPER FLY USER MANUAL Fitting to roof rack...
Page 9
SABER SUPER FLY USER MANUAL Roof bars The Saber Super Fly roof top tent has 2 x optional roof bars which require installation. The roof bars can only be mounted via the existing 4 factory-fitted T-bolts sections located towards the rear of the tent.
Page 10
SABER SUPER FLY USER MANUAL Ladder adjustment For your safety and protection, ensure correct placement and angle of ladder. See diagrams below. Recommended ladder placement is a 4:1 ratio or approx. 70° to 75°. NOTE: Under no circumstances should anyone be inside the roof top tent if the ladder is not locked and secured at the correct angle.
Page 11
Opening & Set up Once the Saber Super Fly is fixed securely to the vehicle’s roof rack and the ladder is locked and angled correctly, climb the ladder, release the locks on either side of the tent and lift until the gas struts take over.
Page 12
SABER SUPER FLY USER MANUAL 2 Year Warranty 23ZERO will replace or repair any product at its discretion that is subject to faulty manufacturing or workmanship including materials. Exclusions The above warranty is limited to manufacturing and materials defects. Not including damage caused by misuse or abuse, wear and tear, condensation, extreme weather, accidents, incorrect set up, damage caused by mould, insects, animals or children.
Page 13
SABER SUPER FLY USER MANUAL Mounting rail dimensions The diagrams and dimensions below will assist in preparing roof racks and roof bars for fitment.
Need help?
Do you have a question about the SABER SUPER FLY and is the answer not in the manual?
Questions and answers