Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Pifco 205698
- Page 1 INSTRUCTION MANUAL Easy Steam Iron Product number: 205698...
- Page 2 Spray Nozzle Temperature indicator How can we help? Temperature dial Water tank The PIFCO team is always interested in what you Soleplate have to say, so why not get in touch? Call us 01909 544 570 WHAT’S IN THE BOX Email us •...
- Page 3 Safety instructions plug from the socket. When using an electrical appliance, basic safety precautions should always be followed, including the following: • Do not allow cord to touch hot surfaces or come into contact with rough or sharp edges. Let the appliance cool completely down before putting away.
- Page 4 Before Use • Do not directly iron or steam on people, animals or clothes while they are being worn. • Some parts of the iron have been slightly greased and as a Some parts of the iron have been slightly greased. When the iron is used for the result the iron may smoke slightly when switched on for the first first time you may notice a slight emission of smoke and heat some sound made time.
- Page 5 Steam ironing How to use your iron Make sure that there is enough water in the water tank. Setting the Temperature Select the recommended ironing temperature Plug the iron into the mains Place the iron on its heel. Steam ironing is only possible when the temperature setting is set to ••• or Check the laundry care label for the required ironing temperature and then MAX.
- Page 6 Technical details Burst steam This function provides extra steam to remove very stubborn creases. Product Code: 205698 Voltage: 220-240V~ 50-60Hz 1. Set the temperature dial to the MAX position and wait until the temperature Power: 1600-2000W light has gone out.
- Page 7 • Customer misuse, modifications or adjustments. • Products with unreadable or removed model numbers. PIFCO disclaims any liability for incidental or consequential loss or damages. In the event of a problem: • Please refer to the troubleshooting tips section within your user guide for help and guidance.
- Page 8 www.pifco.com...
Need help?
Do you have a question about the 205698 and is the answer not in the manual?
Questions and answers
How do I get my Pifco iron to be hot and steam
To make your Pifco 205698 iron hot and produce steam:
1. Make sure there is enough water in the water tank.
2. Place the iron on its heel.
3. Plug the iron into the mains.
4. Select the correct temperature using the temperature dial:
- • Synthetics
- •• Silk, Wool
- ••• Cotton
- MAX Linen
5. For steam ironing, set the temperature to ••• or MAX. Steam will only work at these settings.
6. Wait for the temperature indicator light to go out.
7. Set the steam control to the desired steam position. The iron will start steaming once it reaches the set temperature.
This answer is automatically generated
What are the steam control positions?