Homedics Color Cube 50 (LT-50) Manual

Also See for Color Cube 50:

Instruction manual and warranty information (2 pages)

Table of Contents

Contents

1 Experience the Magic of ColorMotion
2 The Color Cube Features
3 Instructions for Use
4 Maintenance
5 IMPORTANT SAFETY INSTRUCTIONS
6 Documents / Resources
- 6.1 Download manual

Homedics Color Cube 50 (LT-50) Manual

Experience the Magic of ColorMotion

This product is built with highquality craftsmanship to provide you years of dependable service. We hope that you will find it to be the finest product of its kind.
Create excitement anywhere. Inside this box lies the magic of the color cube. It's fun. It's cool. And it's created for your enjoyment. Use it at a party, chill with it, study with it, boogie with it, sleep with it, decorate with it, meditate with it... use it with your friends or by yourself. It's in your hands from here... just enjoy it!

The Color Cube Features

Choose from: 8 hip color settings OR Continuously changing color program
Nite sensor automatically turns the Color Cube on when room darkens and off when room lightens

For use in standard outlet
Can be used in daylight and darkness to enjoy the benefits of color therapy

All servicing of this product must be performed by authorized HoMedics Service Personnel only.

Instructions for Use

Set up the unit by first turning prongs and stabilizer out. (Fig 1)
Plug the Color Cube 50 into a 120V household outlet.
This unit is equipped with a Nite Sensor, which automatically turns on the unit when the room darkens and off when the room lightens. There is an on/off switch located on the back of the unit, which allows you to decide if you want to use this function. (Fig 2)
To use in a well-lit room, first turn Nite Sensor to the off position.

To use the color program, press the Program button. (Fig 3) The program will run through a continuously changing color program until the unit is turned off.
To use the solid glowing colors, press the Color button. (Fig 3) Continue pressing to scroll through the 8 different colors. Stop on the color you desire and the Color Cube will glow in this color until you turn it off or select something different.

To use the Nite Sensor function, first slide Nite Sensor to the On position. The unit will immediately turn on if the room is dark. It will run with the last selected program or solid glowing color. When room lightens, the unit will automatically turn off.

While in Nite Sensor mode, the user can still manually turn off and on by pressing the corresponding Off, Color or Program buttons.

Maintenance

To Store: You may leave the unit on display or you can store in its box in a cool dry place.

To Clean: First remove from outlet. Wipe off dust with a damp cloth. Never use liquids or abrasive cleaners to clean.

IMPORTANT SAFETY INSTRUCTIONS:

When using an electrical appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING

To reduce the risk of burns, fire, electric shock or injury to persons:

This product is not a toy.
Not intended for use by children.
For adult use only.
Do not use with extension cords.
For indoor use only.
Use this appliance for its intended use as described in this manual.
Never operate this appliance if it has a damaged plug or housing. If it is not working properly, if it has been dropped or damaged, return it to HoMedics Service Center for examination and repair.
To disconnect, remove plug from outlet.
Never cover the appliance when it is in operation.
Plug only in exposed wall outlets where Nite Cube is well ventilated and cannot contact bed coverings or other material that might present a fire hazard.
Do not operate where aerosol (spray) products are being used or where oxygen is being administered.