Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Bissell POWERWASHER
- Page 1 POWERWASHER Instruction Manual...
- Page 2 BISSELL POWERWASHER Table of Contents Power Washer Contents Safeguards & Warnings* *Important to read Assembly Instructions 7-10 Operating Instructions 11-12 Troubleshooting & FAQ 13-16 1. High-Pressure Hose 2. Spray Gun 3. Adjustable Spray Lance 4. Turbo Lance 5. Detergent Bottle...
- Page 3 SAFEGUARDS SAFEGUARDS & WARNINGS & WARNINGS • To avoid injury and property damage, follow all • The power washer is equipped with a Ground safety instructions, tips, and warnings. Fault Circuit Interrupter (GFCI) which greatly reduces the chance of electric shock while the •...
- Page 4 IMPORTANT: IMPORTANT: •Store power washer indoors. Freezing •Never permanently engage the trigger conditions will damage power washer. mechanisms on the spray gun. •Never leave a power washer unattended •Never use hot water in power washer. while “on.” •Never use parts that have not been •Never use an extension power cord.
- Page 5 HIGH PRESSURE HOSE: SPRAY GUN: •At the back bottom of the unit, screw on the high •Lock the trigger of the spray gun by aiming gun pressure hose clockwise (fig. 1). Insert the hose away from you and pushing the lock button from far enough so the collar can thread into the outlet right to left.
- Page 6 • For tough stains, reapply detergent and use a stiff bristled brush to scrub followed by power Straw washing rinse. fig. 7 fig. 8 BISSELL POWERWASHER assembly is complete and ready to use. Follow all safety instructions. fig. 6...
- Page 7 OPERATING INSTRUCTIONS: 1. Make sure the power switch is in the OFF (O) position (fig. 11). 2. Turn on the water supply at the faucet. fig. 9 3. Unwind the power cord and plug the GFCl into a grounded 120 volt outlet. Press the ‘reset’...
- Page 8 2. Turn off the powerwasher if not in use 5. Use the adjustable spray lance when after 5 minutes. cleaning windows. Take care to adjust nozzle to a wide fan spray pattern and 3.
- Page 9 Unit will not turn on. The high-pressure (HP) hose will not connect/stay connected to the spray gun. 1. Be sure the power switch is “OFF.” In most cases, the spray gun is not the problem. The problem is the rubber sleeve covering the 2.
- Page 10 1. Insert the quick-release end of the lance/ detergent bottle into spray gun. When everything is assembled properly and the power switch is turned on, the powerwasher 2. Press spray gun and lance/bottle together may turn on for 1 – 2 seconds to prime the pump.
- Page 11 TROUBLESHOOTING, QUESTIONS & MORE INFORMATION: Call: 800.749.9062 1601175 © 2013 BISSELL Rental, LLC. GRAND RAPIDS, MI 49544 USA...
Need help?
Do you have a question about the POWERWASHER and is the answer not in the manual?
Questions and answers