CONTENTS 1. CE CERTIFICATION 2. WARRANTY ¡ERROR! MARCADOR NO DEFINIDO. 3. INSTRUCTIONS FOR INSTALLATION AND MAINTENANCE ¡ERROR! MARCADOR NO DEFINIDO. 4. INSTRUCTIONS FOR USE ¡ERROR! MARCADOR NO DEFINIDO. 5. FREQUENTLY ASKED QUESTIONS ¡ERROR! MARCADOR NO DEFINIDO.
Marca / Trade.: FM CALEFACCIÓN Modelo / Model no.: GR 1 / GR 2 / GR 3 Nosotros, los abajo firmantes, declaramos bajo nuestra exclusiva responsabilidad que el equipo especificado cumple con la(s) Directiva(s) y Norma(s) mencionadas We, the undersigned, hereby declare under our sole responsibility that the specified...
2. WARRANTY The warranty period is 12 months from the date of the purchase of the unit. The warranty does not cover damages to the glass, lamps, door seals, damage to the insulating material or damage caused by improper installation or maintenance, lack of maintenance, improper repair or misuse. To process the repair of a unit under warranty or for any other query, please contact your distributor and refer to the following description table.
3. INSTRUCTIONS FOR INSTALLATION AND MAINTENANCE Placement distances The distances from the unit to adjacent elements should be as shown in the diagram. If there are heat sources or combustible elements, the safety distance should be at least 500 mm. Locate the appliance under the ventilation hood, to eliminate possible vapors and bad smells.
4. INSTRUCTIONS OF USE User instructions Read this manual carefully before starting to work with the unit. Keep it for future reference and consult an authorized service center when you need technical assistance. The appliance is designed for use in the baking of regeneration of fresh or frozen bakery and pastry products, with a máximum temperature regulation range of 250⁰...
Page 7
GR 1/GR 1 L GR 2 / GR 2 L Tabla 1 Description Versions Temperature LED GR 1/ GR 1 L Temperature control knob GR 1/ GR 1 L Left side temperature LED GR 2/ GR 2 L Right side temperature LED...
It is possible to adjust the hardness of the upper cover of the appliance. For this purpose, an allen head screw is located on the rear of the device (see following picture). Using the tool provided for this purpose, tighten the screw to stiffen the movement of the cover, or loosen the screw to make the movement of the cover softer.
Page 9
When you have finished working with the unit, disconnect it from the mains, wait for ir to cool down and clean the chamber with soap and water. Then rinse and dry the unit, leaving the door open for about 30 minutes.
Need help?
Do you have a question about the GR 1 and is the answer not in the manual?
Questions and answers