Woodley InSight Keto Vet Quick User Manual

The Sample

Sample type: fresh whole blood (Capillary or Venous)

Sample size: 0.5 μL

Anticoagulant: Lithium Heparin only
Testing a Sample
1. Insert the code card supplied with the test strip into the meter. The number on the display should match
the number on the test strip pack
2. Remove a test strip from the foil pack and use immediately (store at 15-30⁰C)
3. Insert a test strip into the meter (arrow facing up) and wait for the flashing
4. Obtain a fresh whole blood sample and test sample immediately. Ensure blood is mixed well prior to
testing
5. When appears, touch the end of the test strip to the blood drop until the test strip fills & the meter
beeps
6. Test results are available on-screen in 10 seconds & stored in memory
7. Discard used strip in clinical waste
Testing the Quality Control Solution
1. Store QC solution at room temperature. Do not refrigerate or freeze
2. Insert a ketone test strip into the meter and wait for the flashing
3. Press the centre button so the screen shows 'CTL'
4. Mix control solution bottle then discard first drop
5. Squeeze a small drop of solution onto a clean surface and apply to tip of test strip until the test strip fills and
the meter beeps
6. QC results are available on-screen in 10 seconds and stored to memory
07.24 SM Ver1
Quick User Guide
to be displayed
to be displayed