Fig.2. Fitting the outer casing 4. IMPORTANT NOTES This is a High Efficiency, Flueless Catalytic, Live Flame Effect heater. It provides radiant and convected warmth both efficiently and safely utilising the latest type catalytic convector burner technology. It is recommended that it is only used as a secondary heat source. To fit the outer casing, locate the threaded Before installation, ensure that the local distribution conditions identification of the type of gas, gas...
CLEARANCES TO NON-COMBUSTIBLES immediate vicinity of the heater must not be used as it may adversely effect performance of the ODS system. The heater M M U U S S T T N N O O T T be installed in a bedroom, bathroom or any sleeping area. Additionally Non-combustible surfaces are defined as brick, metal, marble, concrete etc, and also a number of man- for LPG the heater must not be used in cellars or basements.
(b) High Setting (Fig.5) Fig. 5 - Control knob 6. FITTING THE VERMICULITE GRANULES If the pilot is not already lit, light the pilot as described above. If fitted, remove the screws securing the mounting brackets for the black glass front (4 screws either side With control knob at ‘PILOT’...
G Stress that no coals or logs must be added to the heater and that any replacement parts must only (BEHIND PLASTIC COVER) be authorised ESSE spares. 8. HANDSET OPERATION G Recommend that the heater is regularly serviced at least once a year by a qualified person.
Need help?
Do you have a question about the firewall Optica 50 and is the answer not in the manual?
Questions and answers