Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Xylem Surfbee RTK Base Station
Summary of Contents for Xylem Surfbee RTK Base Station
- Page 1 USV : RTK Base Station Check List Version 1.4.2023...
- Page 2 Table of Content WHAT? Equipment Overview Understanding the LED Indicators Mounting the RTK Base Station So�tware Configuration and Setup Troubleshooting Guide Warranty Information RTK Base Station - Sur�bee Table of Content...
- Page 3 Equipment WHAT? ILLUSTRATION RTK Base Station Closed Open Controller RTK Base Station - Sur�bee RTK Base Station - Sur�bee Equipment Equipment...
- Page 4 RTK Base Station Layout RTK Base Station GNSS Antenna GNSS Antenna Support 915 MHz Antenna RTK Base Station Case RTK Base Station - Sur�bee RTK Base Station Layout...
- Page 5 Understanding the LEDs WHAT? HOW? POWER Blue when attached to power and charging/ o�f when fully charged. Green/Yellow/Red when the Power switch is turned on indicating the state of charge of the internal battery. This white LED will be o�f when no RTCM correction data is received.
- Page 6 WHAT? HOW? Pulse per second. This yellow LED will blink at 1Hz when GNSS fix is achieved. You’ll see this LED begin blinking anytime the receiver detects enough satellites to obtain a rough location. PAIR Blinks blue when waiting to be paired with over Bluetooth.
- Page 7 WHAT? HOW? BASE This LED will blink red when the SETUP switch is set to Base and a survey is being conducted. It will turn solid red once the survey is complete and the unit begins broadcasting RTCM correction data. RTK Base Station - Sur�bee Understanding the LEDs...
- Page 8 Mounting the RTK Base Station WHAT? WHERE? HOW? Setting Up the GNSS Antenna Find a suitable location for the base station where it has a clear line of sight to the sky. Mount it on a stable and elevated platform to minimize obstructions.
- Page 9 WHAT? WHERE? HOW? Setting up the RTK Base Station Ensure the base station is charged or connected to a stable power source. Turning on the RTK Base Station Flip the power switch to "ON" position, and make sure the setup switch is �lipped to "BASE"...
- Page 10 WHAT? WHERE? HOW? Disassembling the RTK Base Disconnect all the antennas and place them Station inside the case. Charging the RTK Base Station The RTK Surveyor has a built-in 1200mAh lithium polymer battery that will enable up to 5 hours of field use between charging. If more time is needed, a common USB power bank can be attached boosting the field time to 40 hours.
- Page 11 So�tware Configuration WHAT? HOW? Auto-connect With your Sur�bee’s Controller already connected to your USV, click Settings and look for NTRIP Options, selecting Auto-Connect. The system is going to look for your RTK base automatically. Manual Connect Go to Settings and on NTRIP Options click on Configure.
- Page 12 WHAT? HOW? RTK Base Station - Sur�bee So�tware Configuration...
- Page 13 Troubleshooting WHAT? WHERE? HOW? Reset and Power Check Start by resetting the system and double- checking the power supply. Auto Connect Reset If the problem lingers, reset the auto connect feature. Just turn it o�f and then on again. This o�ten resolves connectivity hiccups.
- Page 14 WHAT? WHERE? HOW? Cables and Antennas Still facing trouble? Disconnect all cables and antennas. Then, move on to manual so�tware configuration. Manual So�tware Configuration If the issue persists, it's time to manually configure the so�tware settings. Follow the instructions in the manual to ensure correct setup.
- Page 15 Warranty Information Warranty Manufacturer’s Warranty: Electronic Hardware. Duration: The warranty coverage for the Electronic Hardware is valid for a period of 6 months from the date of purchase. Coverage: This warranty covers defects in materials and workmanship under normal use and service. If a product is found to be defective in material or workmanship during the warranty period, it will be repaired or replaced at the manufacturer's discretion.
Need help?
Do you have a question about the Surfbee RTK Base Station and is the answer not in the manual?
Questions and answers