Table of Contents
Advertisement
Quick Links
OWNER'S MANUAL
2 5 G A L L O N T O W - B E H I N D S P R A Y E R
MODEL:
S T - 2 5 1 B H
• Assembly
• Installation
• Operation
• Repair Parts
This sprayer is
designed for use with
lawn tractors and lawn
and garden tractors.
Visit us on the web!
www.brinly.com
English Manual
Call Customer Service, Toll-Free: 877-728-8224
Important: This manual contains information for the safety
of persons and property. Read it carefully before
assembly and operation of the equipment!
1
L-1914-G
Advertisement
Table of Contents
Related Manuals for Brinly ST-251BH-A
Summary of Contents for Brinly ST-251BH-A
- Page 1 Call Customer Service, Toll-Free: 877-728-8224 Important: This manual contains information for the safety Visit us on the web! of persons and property. Read it carefully before www.brinly.com assembly and operation of the equipment! English Manual L-1914-G...
-
Page 2: Table Of Contents
INTRODUCTION AND SAFETY ================================================================================================== CONGRATULATIONS on your new Brinly-Hardy Lawn Sprayer! This accessory has been designed, engineered and manufactured to give you the best possible dependability and performance. Should you experience any problem you cannot easily remedy, please do not hesitate to contact our knowledgeable customer service department toll-free at 1-877-728-8224. - Page 3 SAFETY ================================================================================================== The safety labels shown in this section are placed in important areas on your product to draw attention to potential safety hazards. On your product safety labels, the words DANGER, WARNING and CAUTION are used with the safety-alert symbol. DANGER identifies the most serious hazards.
- Page 4 SAFETY ================================================================================================== GENERAL NOTES (OPERATION), continued • Do not tow this product behind a motor vehicle such as a car PROTECT THOSE AROUND YOU or truck. • Before you operate any feature of this attachment or • Always wear substantial footwear. Do not wear loose fitting towing vehicle, observe your surroundings and look for clothing that can get caught in moving parts.
-
Page 5: Parts
QUESTIONS? MISSING PARTS? REPLACEMENT PARTS? STOP DON’T GO BACK TO THE STORE! Please call our Customer Service Department, Toll Free: (877) 728-8224 or email: customerservice@brinly.com Ref # Part # Description Ref # Part # Description B-6322F-10 Towbar; Front, Painted 1008563... - Page 6 PARTS ================================================================================================== ST-251BH Ref #s on page 7 English Manual L-1914-G...
- Page 7 Clamp, Hose B-6400 Hand Wand Installation Questions? Missing Parts? B-6046 Elbow DON’T GO BACK Replacement Parts? STOP TO THE STORE! B-6027 Pump; 2.0 GPM, CE Rated Please call our Customer Service Department, Toll Free: 877-728-8224 or email: customerservice@brinly.com English Manual L-1914-G...
- Page 8 PARTS ================================================================================================== ST-251BH Z-1705 Hardware Bag “A” Z-1987 Hardware Bag “B” F-782 Knob, 4 Prong, Black B-6054 Washer, Vinyl, 3/4" B-4355 Nut, Whiz Lock, 5/16" -18 B-6047 Clamp, Hose B-5695 Bolt, Hex Fl. Hd, 5/16 B-6043 Nozzle Body, 90 Deg 22M0616P Screw, Round Head, #10 B-6045...
-
Page 9: Assembly
ASSEMBLY ================================================================================================== Step 1 INSTALL CLEVIS A. Install Clevis (47) to the Tow-bar (41). B. Install Hitch Pin (48) and secure with Hairpin Cotter. (49). 50 - Hex Flange 32 - Whiz Bolt, 5/16” x 5/8” Lock Nut, 5/16” Qty. 2 Qty. - Page 10 ASSEMBLY ================================================================================================== Step 2-2 D. Inside the tank (1), on the end of the suction hose (12): Attach the mesh strainer (22) by screwing it to the 1/4 inch adapter (21). NOTE: The suction hose (12) is already attached to the pump.
- Page 11 ASSEMBLY ================================================================================================== Step 4 HOSE SWIVEL NUTS A. Insert a Hose Barb (25) through the threaded side of each Hose Swivel Nut (26), as shown. B. Insert one Vinyl Washer (4) against the back side of the Hose Barb (26) to insure that the fittings do not leak.
- Page 12 ASSEMBLY ================================================================================================== Step 5-2 C. Stow the wand and hose by wrapping it around the top of the sprayer tank, then secure the wand to the wand holder clips. Step 6 ATTACH BOOM HOSE TO THE PUMP A. Attach the 38 inch 15 - Hose Clamp Hose (13) to the Qty.
- Page 13 ASSEMBLY ================================================================================================== Step 7 INSTALL THE TOWBAR Install the Towbar (41) to the Rear Base (6) as shown. 32 - Nut; Whiz Lock 34 - Bolt; Hex Flange 5/16” | Qty. 4 5/16” x 5/8” | Qty. 4 A. Install Axle (42) in to Step 8 Rear Base (41).
- Page 14 ASSEMBLY ================================================================================================== Step 9 INSTALL BOOM SUPPORTS Install the Boom Supports (5) to the left and right side of the Rear Base Assembly (6) using 2 Lock Nuts (32), as shown. Note: Thread lock nut close to the end of the boom support.
- Page 15 ASSEMBLY ================================================================================================== Step 11 CONNECT PUMP SUPPLY HOSE TO BOOM A. Place a Hose Clamp (15) on the end of the 38 inch hose (13) and fit the center orifice of the Hose Barb (18) into the end of the hose as shown.
- Page 16 ASSEMBLY ================================================================================================== NOTE: The Sprayer Tip (25) and Nozzle Strainer (26) are easily lost when the Nut Tip Fitting is removed. Use caution. Step 12 A. Assemble the sprayer tips / nozzles with hardware found in the tip bag to the right Boom Extension (7), as shown.
- Page 17 ASSEMBLY ================================================================================================== Step 13-2 CONNECT SPRAYER HOSES A. Connect the Sprayer Hose (12) for both left and right sprayer nozzles to the Hose Barb (18), as shown. B. Tighten the hose clamp (15) with a pair of pliers. 15 - Hose Clamp Qty.
-
Page 18: Operation
OPERATION ================================================================================================== INSTALLING SPRAYER DETERMINING WEIGHT FOR SPRAYER CAUTION: Avoid injury! Excessive towed load can cause loss of traction and loss of control on slopes. Stopping distance increases with speed and weight of towed load. Total towed weight must not exceed combined weight of pulling machine, ballast and operator. -
Page 19: Installing Electrical Connections
OPERATION OPERATION ================================================================================================== INSTALLING ELECTRICAL CONNECTIONS NOTE: Switch wire harness colors do not need to match CAUTION: Avoid injury! mating connector wire colors for the pump to function. Care should be used when working around batteriesUse insulated tools when making CAUTION:Avoid Injury! Care should be used battery connections. -
Page 20: Boom Operations
OPERATION ================================================================================================== WAND BOOM OPERATIONS For spraying in a OPERATIONS Normal downward vertical orientation spraying configuration such as along fences and is controlled by the or hedges, use the operator in the seated wand operation. position. The wand can be used Boom spraying is the for spraying in various normal spraying... - Page 21 OPERATION OPERATION ================================================================================================== OPERATION OPERATION TOWING VEHICLE REQUIREMENTS TOWING VEHICLE REQUIREMENTS Determine how many tanks are required to complete the total Determine how many tanks are required to complete the total job: job: The lawn sprayer requires towing equipment with a 12-volt battery The lawn sprayer requires towing equipment with a 12-volt battery Amount of Water / Tank Capacity = Number of tanks from Amount of Water / Tank Capacity = Number of tanks from...
-
Page 22: Chemical Disposal
In North America and Canada call Toll-Free: 877-728-8224 Chat online: www.brinly.com Maximum Towing Speed ..... 5 mph Tank Capacity ......25 gal Email: customerservice@brinly.com... - Page 23 NOTES ================================================================================================== English Manual L-1914-G...
-
Page 24: Warranty
Brinly-Hardy Co. During Brinly-Hardy Company • 3230 Industrial Parkway • Jeffersonville, IN 47130 • (877) 728-8224 • brinly.com L-1914-G...
Need help?
Do you have a question about the ST-251BH-A and is the answer not in the manual?
Questions and answers