Related Manuals for Ground Hog ED-90-H
Summary of Contents for Ground Hog ED-90-H
- Page 2 WARNINGS AND SAFETY INSTRUCTIONS This symbol means DANGER, WARNING or CAUTION. Personal injury and/or property damage may occur unless instructions are followed carefully. WARNING ~ THIS POWER TOOL CAN BE DANGEROUS! This tool can cause serious injury to the operator and bystanders. The warning and safety instructions in this manual must be followed to provide reasonable safety and efficiency in using and storing this earth drill.
- Page 3 4. Use only genuine replacement parts as rec- 4. Use only the # 1300 auger attachment pin and ommended by Ground Hog or the engine make sure that it is properly attached. manufacturer. 5. Be sure the auger bit stops turning when you release the throttle.
- Page 4 INTRODUCTION It is your responsibility as the operator of this piece of equipment to know what specific requirements, precautions and work hazards exist. You must read, understand and follow all of the information contained in this operator’s manual and inform any person who might be assisting you.
- Page 5 HANDLE BAR POSITIONS There are three different handle bar positions that the operator of the 1M5C earth drill can use. Each position has a specific purpose and each one plays a part in promoting convenience and versatility to the operator while at the job site. POSITION 1: This is the starting position.
- Page 6 WARNING using only genuine replacement parts as rec- ommended by Ground Hog or the engine Hitting a buried object, such as a rock, could manufacturer. cause a sudden side thrust against the operator.
- Page 7 OPERATING INSTRUCTIONS cont’d... WARNING WARNING Never connect or disconnect the auger or au- The earth drill shall be stored in a manner that ger extensions while the engine is running. prevents it from falling, rolling or tipping over. DRILLING WITH EXTENSIONS WHEN NOT IN USE It is not recommended to dig with extensions longer than three feet long.
Need help?
Do you have a question about the ED-90-H and is the answer not in the manual?
Questions and answers